Features:
Wireless transmitter receiver system, for Stage performance.
UHF 600-870 MHz band and latest high frequency filter of the RF to avert frequency interference.
PLL system, preset 16 non-interfered channels.
Special design commanding circuit, strongly improve S/N ratio.
Automatic frequency scan feature searches for available frequencies.
Longest distance UP TO 40m
Twice mixer high frequency circuit design, very strong sensitivity.
Using surface amount technology for PCB, more stable function.
The receiver support DC power supply and AA batteries.
Specifications:
1. Receiver:
- Frequency range: 600MHz-870MHz
- Modulation type: FM
- Oscillator system: PLL circuit
- Operation distance: About 40m
- De-emphasis: 50 u/sec
- receiving sensitivity: Sina>30dB 10dBuV
- Squelch sensitivity: 17dBuV±4dBuV
- S/N ratio: (f1KHz=1mV)95dB(A)
- Audio output level at div.f15 KHz: (F40KHz)800Mv
- THD(at SG output 56 dBuV): (f1KHz=1mV)<0.8%
- Output impedance: 5K-10K ohms
- Power: DC9V / 3VAA
- Current consumption: 9V / 60mA 3V / 100mA
- Antenna: Dual 1/4 wave length rod antennas
- Controls: Audio level volume, channel select switch, ACT key
2. Transmitter:
- RF output power: 10dB±1dB
- Spurious: -50dBm
- Modulation factor: 40KHz
- Pre-emphasis: 50usec
- Maximum input level: +2dBV
- Input impedance: 20K ohms
- THD: <0.8% (1KHz 100mV)
- Audio frequency response: 50Hz-20KHz±3dB
- Operating power voltage: 1.5V
- Current consumption: 80mA
- Power: 1.5V (AAA size battery)
- Antenna: Permanently attached 1/4 wave length wire
- Controls: Power switch, 15Db pad switch
- Indicators: Power on(LED on), Low battery(LED flash when battery less than 1.1v), ACT(LED on)
Package List:
1 * Receiver
1 * Transmitter
1 * Power Adapter
1 * Audio Cable
1 * Operation Manual (English & Chinese)
Note: The batteries are not included.