Brass Hose Fittings Male/Female Thread 1" to 2" Barb Hose Tail End Connector

SPECIFICATION:
●Type: Pipe Fittings
●Material: Brass
●Size: 1",  1-1/4", 1-1/2", 2"(As shown in the picture)
Size Description: F = Female = Internal Thread, M = Male = Outer Thread
●Suitable for: gas, coal gas, water, oil and other media
●Properties: 
Brass has the advantage that it is not easy to rust, corrosion-resistant, easily conducts heat and has strong electrical conductivity, high temperature resistance, high pressure resistance, explosion protection, etc.
●Precautions for installation: When installing, raw material tape or gasket should be wrapped on the thread to seal the threaded connection.

INTRODUCTION OF PIPE FITTINGS RELATED PRODUCTS:
1. Nipple: Used to connect two fittings, most commonly used in plumbing solutions.
2. Reducer: If you want to connect two pipes with different widths, you can use a reducer in this case.
3. Angle: Change the pipe direction by 45° or 90°.
4. Cruciform: As the name suggests, the part is in the shape of a cross, with four branches in opposite directions. One of the four crosses serves as the entrance, and the remaining three branches serve as the exit.
5. Connection: The pipeline must be disconnected during maintenance, connection or replacement. Couplings are parts used to disconnect pipes when required to achieve the above purposes.

NOTE:
- Please allow minor errors due to manual measurement. Thank you for your comprehension.
- Monitors are not calibrated, the element color shown in the photos may differ slightly from the real object. Please take the real one as standard.

PACKAGE INCLUDE: 
According to your choice!Choose your needs from the drop-down menu above.