1253-8001 80V Motor Speed Controller China-Made Programmable PMC Forklift Pump Compatible-CurtisNote: The buyer should confirm with the seller the throttle type (0-5kΩ, 5k-0Ω or 0-5V).Product Description:Compatible-Curtis 1253-8001 Controller
80V DC Series Motor Controller
Hydraulic Pump Motor Controller
Key Features:- Model: 1253-8001 (HELI / HANGCHA Model: EVC255-8001)
- Norminal Battery Voltage (Volts): 80V DC
- The buyer should confirm with the seller the battery system voltage and the throttle type (0-5kΩ, 5k-0Ω or 0-5V).
- By defaut, we will the controller of setting of 80V / 600A / 0-5kΩ (2-Wire Potentiometer Throttle).
Notice:
By default, we will deliver the controller with default setting of 80V /
600A / 0-5kΩ. For better applying the controller to your system, the
buyer should confirm with the seller the throttle type (0-5kΩ, 5k-0Ω or 0
– 5V, etc.)
User Manual:Click
here
Overview:-
The 1253 provides a cost-effective solution for control of high power
DC series-wound hydraulic pump motors. Its system integration features
are designed primarily for Class I and Class II material handling
vehicles. Typical applications include the pump systems of material
handling trucks (counterbalance trucks, reach trucks), aerial lift
platforms (scissor lifts, articulating/telescoping booms), and other
industrial vehicles.
- The 1253 accepts inputs from up to four Speed
Select switches and also from an analog throttle. Its internal
microprocessor-based logic controller provides maximum flexibility at
minimum cost. Its performance characteristics can be tailored through an
array of programmable parameters.
- The 1253 controller is fully
programmable through an original 1313-4431 Handhold Programmer or
1314-4402 PC Programming Station. The programming device provides
diagnostic and test capability in addition to configuration flexibility.
Key Features:- Model: 1253-8001
- Norminal Battery Voltage (Volts): 80V
- Amature Current Limit (amps): 600A
- Programmable Undervoltage Cutback (Volts): 54-70
- Overvoltage Cutoff (Volts): 102
- PWM operating frequency: 15.6 kHz
- Electrical isolation to heatsink (min.): 500 VAC
- KSI input voltage: 28–60V DC
- KSI input current (no contactors engaged):
- 60 mA without programmer
- 130 mA with programmer
- Logic input current: < 1 mA
- Status LED output current (max.): < 2 mA
- Heatsink overtemperature cutback: linear cutback starts at 80°C; complete cutoff at 120°C
- Heatsink undertemperature cutback: 50% current below -25°C
- Throttle Type: 0-5K Ω (default setting), 5K-0 Ω, 0-5V or single-ended 3-wire potentiometer (1kΩ to 10kΩ range)
- Dimensions: L196xW146xH77 mm
- Net Weight: 2.6 kg
- Operating ambient temperature range: -40°C to 50°C
- Storage ambient temperature range: -40°C to 85°C
- Package environmental rating: IP54
Features include:- Smooth and Quiet Control
Programmable acceleration rates provide smooth application of pump motor torque.
15.6 kHz PWM frequency for near-silent operation.
- Programmable Flexibility
Easily programmable through an original programming device.
Four Speed Select inputs (SS1.SS4) with individually programmable top speeds.
Programmable throttle input for precise speed control with a variety of signal sources.
Programmable turn-off delay allows SS4 to be used for power steering.
Adjustable minimum speed setting to ensure pump lubrication and to maintain steering system pressure.
- Robust Safety and Reliability
Interlock feature disables the controller when operator is not present.
Programmable startup lockout prevents inadvertent operation.
Seamless integration with original gauges (models 803, 841, 906, and enGage. IV) for lift lockout function.
Lift lockout disables the controller at low battery state of charge.
Redundant watchdog timer circuits ensure proper software operation.
External Status LED output for easy troubleshooting.
Short-circuit protection on main contactor driver.
Precharge control prevents pitting of contactor tips at startup.
Thermal cutback provides protection to the controller.
Rugged housing meets IP54 environmental ratings.
- Easily programmable through the original 1313-4431 Handhold Programmer or 1314-4402 PC Programming Station.
DC Series Motor Controller Parameter List:Click
herePackage List:- 1 x 1253-8001 Motor Speed Controller
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2.
For remote regions of DHL/FedEx..., extra shipping costs might be
charged. Usually it costs about 30USD-50USD. We will contact you if
shipping company informed us your address belongs to remote area. Thanks
for your understanding.
Return Terms
If
you receive the item that not satisfied or defective, please do not
open case and kindly notify us within 30 days. We will guide you the
returning process for replacement or refund.
Custom Duties & Taxes
1.
It is buyer's responsibility to cover the import duties, taxes.We do
not charge any taxes and fees, and the possible taxes and fees will be
collected by the platform or by third parties such as customs and
carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1.
Please kindly leave us a positive feedback and 5 star DSR if you
satisfied with our product and service. Please feel free to contact us
firstly if you have any problem with your order, we are responsible and
credible seller and will solve the issue it for you asap.
2. If you
are dissatisfied for any reason, please don't be quick to leave us
neutral or negative feedback. We work hard to make sure EVERY CUSTOMER
100% SATISFIED and resolve any problem for you and always leave positive
feedback to all our customers.