- Six to One coax switch. Unused ports are grounded.
- Aluminum enclosure. Can be mounted on a wall or pipe (25 to 50mm diameter).
- SO-239 connectors.
- Power handling 2000W at SWR < 2.
- Tandem Match Power / SWR sensor inside, rated up to 2000W.
- Hot-switching protection. Switching request sent while transmitting will be postponed.
- 1.8MHz to 52MHz, SWR < 1.15, Isolation 1.8-30MHz >60dB, 53dB on 50MHz .
- 2.4GHz WiFi 802.11n network interface.Typical coverage ~100m.
- Power requirement: 10-16VDC / 0.3A remotely through coax cable or localy.
- Listens to RadioInfo UDP packets sent by N1MM+, DXLabs and other logging software to extract radio operating frequency and select antenna. Can be used with any radio that can be interfaced to those loggers.
- Connects directly to Flex 6x00 series radio and follows operating frequency. Can be used remotely without PC.
- WEB server that can display operating frequency, choose available antenna on that band, displays transmitting power and SWR on PC/ MAC or tablet.
- WEB page is fully customizable.
- Provides a fast websocket interface for Node-RED integration.
- Dimensions (enclosure) 7.25 x 4.75 x 2.25in (187 x 120 x 55mm)
For more information, photos and User manual visit WAS6 project at: http://www.af6sa.com/projects/was6.html