DC 150W 20A Colour Screen Intelligent Electronic Load Discharge Battery Tester
1: Wide range of applications
2：2.4 inch color screen
3: Manual form: fan centre paste tutorial QR code, mobile phone scan code to get electronic tutorial
4：Chinese and English interface can be switched
5：Working mode: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
The product works with a 12V1A independent power supply and is equipped with an alloy integrated silent (20±3dBA) heat sink with an intelligent temperature control system to control the work of the heat sink fan.
Compared to traditional analogue electronic loads, the DTL150 uses a protection first and then work mode to control the discharge, which can effectively protect the discharge power supply from damage caused by over-limit and over-discharge.
The DTL150 adopts a four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, which makes the voltage measurement more accurate.
Load type: DC CNC electronic load
Working voltage: DC12V with 12V 1A power adapter
Load voltage: DC0~150V
Load current: DC0~20A
Load power: 0 ~ 150W (120V above the maximum load 60W)
Wiring method: A+ V+ V- A- four-wire system, backward compatible with two-wire system
Power metering upper limit: 999.999Wh
Capacity measurement upper limit: 999.999Ah
Cumulative timing range: ddd:hh:mm:ss (days:hours:minutes:seconds)
Operating modes: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
Overvoltage protection: supports up to 150V overvoltage protection
Overcurrent protection: supports up to 20A overcurrent protection
Over-power protection: supports up to 150W over-power protection
Limited voltage discharge: also called low voltage protection, support, default unlimited voltage discharge, set according to your needs
Time limit discharge: supports a maximum of 99 hours:59 minutes time limit discharge
Heat sink: alloy integrated silent (20±3dBA) heat sink Internal temperature ≥40°C automatic operation
External temperature measurement: connect NTC 3950 10K 1% temperature sensor to measure and display 0~100℃ temperature
Chinese and English interface switching: supported
Zeroing of total data: supported
Voltage and current nulling: supported
Voltage open calibration: supported
Current open calibration: Support
Screen brightness adjustment: Support
Screen hibernation standby setting: supported
PC software online: not supported
Restore factory settings: Supported
Product dimensions: 165 x 95 x 80 (mm)
Product package size: 195×105×135mm
Product package weight: 625g Net weight of main unit: 400g
Paper manual: None
Instruction form: fan centre paste tutorial QR code, mobile phone scan code for electronic tutorial
1*Electronic load
1*Adapter
1*adapter
2*crocodile cable
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
1: Wide range of applications
2：2.4 inch color screen
3: Manual form: fan centre paste tutorial QR code, mobile phone scan code to get electronic tutorial
4：Chinese and English interface can be switched
5：Working mode: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
The product works with a 12V1A independent power supply and is equipped with an alloy integrated silent (20±3dBA) heat sink with an intelligent temperature control system to control the work of the heat sink fan.
Compared to traditional analogue electronic loads, the DTL150 uses a protection first and then work mode to control the discharge, which can effectively protect the discharge power supply from damage caused by over-limit and over-discharge.
The DTL150 adopts a four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, which makes the voltage measurement more accurate.
Load type: DC CNC electronic load
Working voltage: DC12V with 12V 1A power adapter
Load voltage: DC0~150V
Load current: DC0~20A
Load power: 0 ~ 150W (120V above the maximum load 60W)
Wiring method: A+ V+ V- A- four-wire system, backward compatible with two-wire system
Power metering upper limit: 999.999Wh
Capacity measurement upper limit: 999.999Ah
Cumulative timing range: ddd:hh:mm:ss (days:hours:minutes:seconds)
Operating modes: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
Overvoltage protection: supports up to 150V overvoltage protection
Overcurrent protection: supports up to 20A overcurrent protection
Over-power protection: supports up to 150W over-power protection
Limited voltage discharge: also called low voltage protection, support, default unlimited voltage discharge, set according to your needs
Time limit discharge: supports a maximum of 99 hours:59 minutes time limit discharge
Heat sink: alloy integrated silent (20±3dBA) heat sink Internal temperature ≥40°C automatic operation
External temperature measurement: connect NTC 3950 10K 1% temperature sensor to measure and display 0~100℃ temperature
Chinese and English interface switching: supported
Zeroing of total data: supported
Voltage and current nulling: supported
Voltage open calibration: supported
Current open calibration: Support
Screen brightness adjustment: Support
Screen hibernation standby setting: supported
PC software online: not supported
Restore factory settings: Supported
Product dimensions: 165 x 95 x 80 (mm)
Product package size: 195×105×135mm
Product package weight: 625g Net weight of main unit: 400g
Paper manual: None
Instruction form: fan centre paste tutorial QR code, mobile phone scan code for electronic tutorial
1*Electronic load
1*Adapter
1*adapter
2*crocodile cable
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 06.07.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 07.08.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: