![]() | AUTOOL SDT103 automotive smoke leak detector can assist service technicians in leak detection testing. The AUTOOL SDT103 Automotive Smoke Leak Detector can assist service technicians in leak detection testing. Leak detection is the most basic but absolutely essential test in the automotive repair process. The SDT 103 Automotive Smoke Leak Detector is capable of outputting a constant standard test pressure of 32 mbar required by automotive EVAP systems through precise pressure regulation of the external air source, which can output smoke within seconds and can find leak holes as small as 0.5mm. |
![]() | ![]() | ![]() |
Fast Smoke Output The smoke can be produced within 30 seconds, and with stable and large amount of smoke output after switch-on (by heating up baby oil). Dramatically reducing diagnostic time. | Adavanced Technology AUTOOL SDT103 EVAP smoke machine comes with various cone adapter, which can fit in almost all lines and hoses and detect even the smallest leaks. You can test exhaust system, cooling system, intake system, engine air tightness and EVAP system. | Special Detection for EVAP The sdt103 can be used by connecting an external air source and a 12V battery.It is designed with a built-in pressure controller to fix the output pressure at 3.2Kpa (0.46psi), which is especially for EVAP system testing to prevent EVAP Pipes from being damaged by excessive pressure. |
![]() | ![]() | ![]() |
Smoke Flow can be Adjusted Equipped with airflow meter to observe the current airflow volume. And the airflow regulator to better control the smoke effect.It can be outputs lots of smoke within 30 seconds after turning on. | Overheat & anti-frost protection Built-in intelligent protection device, if it exceeds the working limit,such as 75℃ it will automatically turn off the power to ensure the safety of the operator and the equipment. | Wide Range of Application Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. cars, light trucks and speedboats, etc. |
![]() | Note: 1.When you use this smoke leak detector for the first time, fill with 20ml oil. Please be careful NOT to beyond this range. 2.Do NOT run the detector over 8 minutes continuously. It needs interval rest. 3.The detector has an intelligent protector, if it exceeds the working limit, such as over 80 ℃, it will automatically turn off the power. In this case, please operate it later. 4.Use mineral oil based smoke oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating. 5. Before refilling new oil, please pour out the remaining oil in the detector, drain the old oil and then add new oil. 6.To ensure the safety of people and vehicles, the engine does not need to be ignited during use. |
![]() | Description: AUTOOL SDT103 is a professional machine for automotive pipe system leak detection, will help you find the leak and decide over 99% of generic smoke leakage problems. Support various systems smoke testing, such as EVAP system, intake system, cooling system, engine air tightness, various pipe fittings, exhaust system and so on. Throuth heating mineral oil or baby oil into smoke, and then pressing it into the sealed pipeline system, it can be outputs lots of smoke within 30 seconds, improve the efficiency of diagnosis. | ![]() |
![]() | Specification: Test oil: Mineral oil or baby oil (Oil not included ) Output pressure:3.2Kpa(0.46psi) Air pressure output: External air source Power supply: DC12V Air pressure output: need to connect external air pump Test oil capacity: 10-20ml Main Unit Dimension:180x135x100mm Package weight: 2.7kg Overheat Protection: 80℃ | Package Include: 1pc * AUTOOL SDT103 Smoke Leak Detector 1pc * Universal Inflatble adapter 1pc * EVAP Special Connector 1pc * Valve Core Wrench 1pc * Standard Cone Adapter 1pc * Power Cord Clamp 1pc * Test Oil Refill Bottle 1pc * Smoke Hose 1pc * User Manual |