1pc LPS-01-WL Linear Power Supply (SingleRail) 5-16VDC 3A KIT DIY
DIY KIT Project：
DIY kit: Contains the PCB and the components needed on the PCB, but does not include the power transformer .
To complete this project, high level knowledge of electronics and rich experience in terms of soldering and testing are required.
Due to time zone and language communication restrictions, we can only provide limited technical support, and you need to solve problems by yourself.
Tech highlights：
Single-pass, series regulator design.
Low noise, high PSRR.
High-current PNP Transistors pass transistors.
The high current rating provides a very high safety headroom against overcurrent damage.
More sustained currents are possible by using larger, offboard heatsinks.
Use Schottky rectifier bridge.
The output voltage is continuously adjustable from 5-16V, no additional replacement of components is required.
If you need other voltages, please contact us.
Do not short the output terminal to discharge capacitor, otherwise it will damage the power board.
PCS Size:
Typical Application
Input voltage VAC= (Output voltage +8)/1.414
Please reserve 30% redundant power for the transformer.
Transformer Power=VAC*I*(1+0.3)
For example:
12VDC-OUT-3A
Input voltage VAC=（12+8)/1.414=14.14VAC,
Please choose 15VAC；
Transformer Power= (15*3)*(1+0.3)=58.5W;
Please choose 60W.
5VDC-OUT 9VAC-IN
9VD-COUT 12VAC-IN
12VDC-OUT 15VAC-IN
15VDC-OUT 18VAC-IN
16VDC-OUT 18VAC-IN
Paket:
1pc LPS-01-WL Linear Power Supply (SingleRail) 5-16VDC 3A Kit DIY
