30A 1/2CH Relay Module Optocoupler Isolation High Low Trigger 5/12/24V 100-250V

Popular

    Product Introduction

     
    1 Channel 
    1CH with Guide Rail
    2 Channel
    2CH with Guide Rail
    2CH DC5V / AC100-250V

    Description:
    The module uses high quality 30A relay, normally open interface maximum load: AC 250V/30A, DC 30V/30A.
    Adopting paster OptoCoupler isolation, strong driving capability, stable performance; trigger current 5mA.
    Module operating voltage is available in 5V, 12V, 24V.
    The module can be triggered by a jumper to set a high or low level.
    User-friendly interface design, all interfaces can be directly connected through the terminal block, which is very convenient.
     
    Specifications:
    Material: ABS
    Voltage: 5V, 12V, 24V (optional)

    DC+: Module DC power supply positive (trigger terminal voltage positive)
    DC-: Module DC power supply negative (trigger terminal voltage negative)
    IN: Signal trigger end (default trigger voltage is the same as power supply)
    High/low level trigger mode selection, as shown in the figure, when the jumper is connected to the L terminal, the IN terminal is a low level trigger, and when the H terminal is connected, it is a high level trigger.
    NC: Relay normally closed
    COM: Relay common
    NO: Relay normally open
     
    Package Included:
    1PC*DC 5/12/24V 1 Channel / 2 Channel 30A Relay Board Module Optocoupler Isolation High Low Trigger
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    30A 1/2CH Relay Module Optocoupler Isolation High Low Trigger 5/12/24V 100-250V

    Product Introduction

     
    1 Channel 
    1CH with Guide Rail
    2 Channel
    2CH with Guide Rail
    2CH DC5V / AC100-250V

    Description:
    The module uses high quality 30A relay, normally open interface maximum load: AC 250V/30A, DC 30V/30A.
    Adopting paster OptoCoupler isolation, strong driving capability, stable performance; trigger current 5mA.
    Module operating voltage is available in 5V, 12V, 24V.
    The module can be triggered by a jumper to set a high or low level.
    User-friendly interface design, all interfaces can be directly connected through the terminal block, which is very convenient.
     
    Specifications:
    Material: ABS
    Voltage: 5V, 12V, 24V (optional)

    DC+: Module DC power supply positive (trigger terminal voltage positive)
    DC-: Module DC power supply negative (trigger terminal voltage negative)
    IN: Signal trigger end (default trigger voltage is the same as power supply)
    High/low level trigger mode selection, as shown in the figure, when the jumper is connected to the L terminal, the IN terminal is a low level trigger, and when the H terminal is connected, it is a high level trigger.
    NC: Relay normally closed
    COM: Relay common
    NO: Relay normally open
     
    Package Included:
    1PC*DC 5/12/24V 1 Channel / 2 Channel 30A Relay Board Module Optocoupler Isolation High Low Trigger
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques