Now widely used in:

1. The automotive industry (manufacturing factories, 4S stations, beauty shops).

2. Motorcycle manufacturing factory.

3. Original manufacturers of washing machines and refrigerators.

4. Artificial stone panels and flooring.

5. Wood paint finish (furniture, cabinet panel manufacturers, pianos, wood flooring, etc.).

6. Indoor decoration.

7. Advanced kitchen utensils.

8. Musical instruments.

9. Precious metals.

10. Jewelry.

11. Plastic surface treatment.

12. Precision instruments and other industries.

Product performance and characteristics

(1) It can be directly polished separately. (2) Use with polishing fluid (paste, powder) to achieve better polishing effect on the polished surface Able to handle the traces left by the previous polishing process Convenient replacement The manufacturing process is advanced, the material selection is excellent, and the wool thread has a soft and elastic texture. The fur that integrates the fur and fur does not shed hair during the polishing process, making it a natural and environmentally friendly material, The wool ball polishing series is compatible with the vast majority of pneumatic and electric polishing machines on the market Washable, reusable, cost-effective

Usage

(1) Soak the wool ball onto the disc, install it on the grinder, idle for 5 seconds, and shake off excess water.

(2) Shake the abrasive well, pour a small amount onto the wool polishing disc, and apply evenly on the paint surface with the polishing disc.

(3) Adjust the grinding machine speed to 1800-2200r/min, start the grinding and polishing machine, move it back and forth in a straight line along the direction of the car body, and cover one-third of the long tracks of the polishing disc with each other, without leakage of large areas of paint. Polishing sequence: Grind the right half of the vehicle body in the order of right roof - right front cover - left front cover - right front fender - right front door - right rear door - right rear fender - trunk cover, and grind the left half of the vehicle body in the opposite order. When making the roof, you can open the car door, place a towel next to the door, and step on the door to operate. (4) During polishing, the polishing disc and paint surface should be kept at room temperature. When the temperature rise of the paint surface exceeds 20 ℃, the ground paint surface should be sprayed with water to cool down.

(5) For positions where grinding and polishing machines are not suitable for the edges and corners of the vehicle body, manual polishing should be used, and a dry towel dipped in polishing agent should be used for polishing. Complete all areas of the vehicle with paint finish, including the painted bumper, and be careful not to overheat here. Pay attention to edges and corners, and do not throw them forcefully, as the paint film in these areas is relatively thin.

(6) After polishing the paint surface, clean the entire vehicle with a pure cotton towel.

Key points: To control the speed and humidity of the polishing disc, pay attention to the temperature and edges of the paint surface.

 Precautions 

1. Shake the polishing agent vigorously before use to maintain good effect.

2. All polishing discs should be cleaned and leveled before use to ensure that there are no residual particles. After use, it should be cleaned immediately and placed in a cool place to air dry.

3. During operation, it is necessary to operate indoors to avoid scratches caused by wind and sand falling on the paint surface.

4. When using a polishing machine, it is important to avoid staying at the corners of the vehicle for a long time to avoid exposing the paint surface.

5. Pay attention to the safe use of the grinding and polishing machine.

Car cleaning. To ensure the waxing effect, the vehicle must be thoroughly cleaned before waxing