Description
UTX_B IIS to Coaxial Adapter Board High Quality Digital Interface USB 384KHz 32Bit for Amanero USB Module
Features:
- UTX_B IIS adapter board is designed for Amanero USB module to make up for the regret that this interface has no coaxial output. The input interface of IIS is 20P busbar, and for Amanero USB module can be directly installed on the interface. Meanwhile, in order to meet the different usage scenarios of buyers, the design adds more IIS inputs.
- In addition to the 4-wire IIS signal with MCLK output for Amanero USB, this board can also be connected to 3-wire IIS output without MCLK output, such as Bluetooth module, for Raspberry Pi, etc. Different from the common WM8804/WM8805IIS coaxial solution, this board adopts more advanced and more professional grade SPDIF digital synthesis solution, support high specification up to PCM384KHz/32Bit coaxial output, signal source synchronization clock, avoid the use of PLL clock generation resulting in cold and thin sound, with high analytical power, speed sense and transparent sense, three frequency balance, and stronger analog sound.
- Size: 80mm x 80mm
Input:
- 2-Channel IIS input:
2 x 10P female, compatible with USB interface for Amanero
1 x 5P, used for Bluetooth module, such as Raspberry Pi and so on.
- 3-Wire mode (without the need of MCLK input
- 4-Wire mode (MCLK input frequency: 22.5792MHz/24.576MHz)
Output:
- Coaxial: PCM 44.1KHz ~ 384KHz/32Bit
- Optical: PCM 44.1KHz ~ 192KHz/32Bit
- When the output is set to 32Bit, some decoders may not be able to lock if they do not support it, simply set it back to 24Bit output.
Power Supply:
- Working voltage: DC stabilized voltage +3.3V, ±5%
- Working current: <60mA
- External power supply current: >100mA
The board can be powered in two ways as follows:
- Obtain power from the 20P female port of the USB module, which must be connected the J6 jumper.
- Power from the DC_IN input interface of the board, the J6 jumper must be disconnected.
Note:
- J6 jumper shipment is connected by default, you need to use electric soldering iron operation for disconnecting.
- Only one power supply mode can be used at one time. Otherwise, the USB module and power supply will be damaged.
Package Included:
- 1 x IIS to Coaxial Board
Features:
- UTX_B IIS adapter board is designed for Amanero USB module to make up for the regret that this interface has no coaxial output. The input interface of IIS is 20P busbar, and for Amanero USB module can be directly installed on the interface. Meanwhile, in order to meet the different usage scenarios of buyers, the design adds more IIS inputs.
- In addition to the 4-wire IIS signal with MCLK output for Amanero USB, this board can also be connected to 3-wire IIS output without MCLK output, such as Bluetooth module, for Raspberry Pi, etc. Different from the common WM8804/WM8805IIS coaxial solution, this board adopts more advanced and more professional grade SPDIF digital synthesis solution, support high specification up to PCM384KHz/32Bit coaxial output, signal source synchronization clock, avoid the use of PLL clock generation resulting in cold and thin sound, with high analytical power, speed sense and transparent sense, three frequency balance, and stronger analog sound.
- Size: 80mm x 80mm
Input:
- 2-Channel IIS input:
2 x 10P female, compatible with USB interface for Amanero
1 x 5P, used for Bluetooth module, such as Raspberry Pi and so on.
- 3-Wire mode (without the need of MCLK input
- 4-Wire mode (MCLK input frequency: 22.5792MHz/24.576MHz)
Output:
- Coaxial: PCM 44.1KHz ~ 384KHz/32Bit
- Optical: PCM 44.1KHz ~ 192KHz/32Bit
- When the output is set to 32Bit, some decoders may not be able to lock if they do not support it, simply set it back to 24Bit output.
Power Supply:
- Working voltage: DC stabilized voltage +3.3V, ±5%
- Working current: <60mA
- External power supply current: >100mA
The board can be powered in two ways as follows:
- Obtain power from the 20P female port of the USB module, which must be connected the J6 jumper.
- Power from the DC_IN input interface of the board, the J6 jumper must be disconnected.
Note:
- J6 jumper shipment is connected by default, you need to use electric soldering iron operation for disconnecting.
- Only one power supply mode can be used at one time. Otherwise, the USB module and power supply will be damaged.
Package Included:
- 1 x IIS to Coaxial Board
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.