Bring Superpowers To Any Wired Headphone

SPS™ Source Switching

Our exclusive SPS™ Single Press Switching means no more hassles un-pairing and re-pairing your most used sources. Connect to two different devices and hop between them with a single press of a button.  Hop between your phone and laptop, or tablet and TV with a quick press.  Neon  improves your workflow and streaming audio experience.

“You Shall Pass!” – Gandalf

Neon’s battery is certified by the Council of the Wise for the entire trilogy of The Lord of the Rings (Extended Edition) including side quests for porcelain respites and lembas bread breaks.  Neon’s 300 mAh battery is good for about 14 hours at normal listening levels with EN50332-compliant headphones.

Delicate Sound Quality Meets Brutal Power

Most mobile devices use the mediocre amps integrated into multi-function chips. Neon uses a discrete amplifier architecture to deliver best-in-class sound quality. Neon’s raw noise floor is below 105 nanovolts RMS at any frequency from 10 Hz to 20 kHz with less than 0.05% THD at normal listening levels.  Neon also brings a massive 140 mW per channel into 32 Ohms (a full 2.2Vrms output) to the table, so that Neon will drive nearly any wired headphone out there to high dynamic levels.  

Highest Quality Always – Guaranteed

The Qualcomm QCC3034 inside Neon runs all the best CODECs, to guarantee that amp is fed pristine audio.  Neon automatically negotiates the best CODEC available for each source to automatically provide the best software decoding possible for your application. Whether you require Low-Latency performance for movies and gaming, or a sound quality focus for music, you don’t have to lift a finger (or press a button), 

Professional Grade Condenser Microphone

Neon uses a professional grade 6mm diameter condenser microphone capsule for the highest quality voice capture. Compared to the typical MEMS microphone, Neon’s pro-grade unit yields lower noise and distortion, wider bandwidth, and less compression to provide a natural, full-bodied sound for whoever is listening.  We add in Qualcomm’s legendary cVc as well to reduce noise so the listener hears you, not what’s around you.

Intuitive To Use

Neon has four dedicated buttons: volume up, volume down, the classic “triple button”, and a source button.  Each button has a unique shape for ease of identification.  A single LED intuitively shows current status of Neon.  Neon also has our legendary AO² Auto-On/Auto-Off power control.  It doesn’t get easier than this!