Description
KSA100MKII 150W+150W Class A Power Amplifier Board Hifi Power Amp Board for Domestic Use
Advantages:
- Class A amplifier board
- High power
- Warm tone
- Solid sound
- Excellent low frequency sound
Features:
- Excellent circuit structure refers to the circuit for KERLL in the United States; it is used with premium components to ensure better sound. Axial capacitors for Siemens as feedback capacitors and CBB capacitor for Sprague are used; all small capacitors are imported audiophile capacitors
- Military resistors are used; Using original BI gray adjustable potentiometer and ERO audiophile input coupling capacitor
- Bipolar transistor MJ15034/MJ15035 for ON Semiconductor; Bipolar transistor MJ15024/MJ15025 for ON Semiconductor; the tubes of the entire board are precisely matched to the same polarity
- The first-stage decoupling capacitor. The output and power terminals are all high-current terminals. CNC heat-conducting aluminum bridge heat sink; it is recommended that the heat sink on one side should not be less than 3.5KG
- On-board speaker protection circuit with over-current and overheating protection, and without noise when it turns on/off
- 30A sealed relay enables larger current. Sealed design ensures that it does not get wet, the contacts are not easily oxidized, its service life is longer, and the performance is more stable
Specifications:
- Item name: Class A power amplifier board
- Frequency Response: 20-20KHz
- Signal-to-noise ratio: 100dB
- Output impedance: 4-8Ω
- Power supply range: dual DC 32-60V plus AC 12-18V; recommended dual DC 45V plus AC 12V
- Power supply scheme: It is recommended to use two transformers above 700W to power each channel independently
- PCB Dimensions: 280 x 121 x 2mm (LxWxThickness)
- Total harmonic distortion: ≤0.01%
- Finished board size: 280mm (length)*157mm (width with heat dissipation guide plate)*45mm (height)
- Speaker protection circuit: with protection circuit (mute when turn it on/off, midpoint offset, over-current and over-temperature protection)
- Output power rating: RCA unbalanced
- Signal input method: Class A 150W+150W (4Ω); Class AB 650W+650W (4Ω)
Package Included:
- 1 x Amplifier Board
- 1 x Set of Copper Pillars and Screws
- 2 x Temperature Control Tubes
- 1 x User Manual
Note:
- One power amp board with two channels.
Advantages:
- Class A amplifier board
- High power
- Warm tone
- Solid sound
- Excellent low frequency sound
Features:
- Excellent circuit structure refers to the circuit for KERLL in the United States; it is used with premium components to ensure better sound. Axial capacitors for Siemens as feedback capacitors and CBB capacitor for Sprague are used; all small capacitors are imported audiophile capacitors
- Military resistors are used; Using original BI gray adjustable potentiometer and ERO audiophile input coupling capacitor
- Bipolar transistor MJ15034/MJ15035 for ON Semiconductor; Bipolar transistor MJ15024/MJ15025 for ON Semiconductor; the tubes of the entire board are precisely matched to the same polarity
- The first-stage decoupling capacitor. The output and power terminals are all high-current terminals. CNC heat-conducting aluminum bridge heat sink; it is recommended that the heat sink on one side should not be less than 3.5KG
- On-board speaker protection circuit with over-current and overheating protection, and without noise when it turns on/off
- 30A sealed relay enables larger current. Sealed design ensures that it does not get wet, the contacts are not easily oxidized, its service life is longer, and the performance is more stable
Specifications:
- Item name: Class A power amplifier board
- Frequency Response: 20-20KHz
- Signal-to-noise ratio: 100dB
- Output impedance: 4-8Ω
- Power supply range: dual DC 32-60V plus AC 12-18V; recommended dual DC 45V plus AC 12V
- Power supply scheme: It is recommended to use two transformers above 700W to power each channel independently
- PCB Dimensions: 280 x 121 x 2mm (LxWxThickness)
- Total harmonic distortion: ≤0.01%
- Finished board size: 280mm (length)*157mm (width with heat dissipation guide plate)*45mm (height)
- Speaker protection circuit: with protection circuit (mute when turn it on/off, midpoint offset, over-current and over-temperature protection)
- Output power rating: RCA unbalanced
- Signal input method: Class A 150W+150W (4Ω); Class AB 650W+650W (4Ω)
Package Included:
- 1 x Amplifier Board
- 1 x Set of Copper Pillars and Screws
- 2 x Temperature Control Tubes
- 1 x User Manual
Note:
- One power amp board with two channels.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
