Please read the entire listing before you purchase. 

A-Tach Mount # 50339

Commercial or Tablet mount.

Designed ONLY for the vehicles listed here:  

Ford F150 (2021 - Current Year)

Includes Lightning Models

For models with a floor console. 

Fits in the location shown in the photos. 

Will hold a tablet or phone.


NOTICE: You will only receive a vehicle mount unless you include a device holder from the drop-down menu above.


Before you purchase: Visually inspect your dash for a match to our photos due to model year styling changes in different markets. Also, check to see how the device will fit the location or could affect other vehicle operations. 

2 Parts Are Needed

1 - The Vehicle Mount - Sold above as a "Mount Without Holder" option is for the customers who already have a Device Holder.

2 - A Device Holder - A Device Holder is not included when purchasing the "Mount without Holder" option but a holder can be purchased together with the mount in the drop-down menu above. See holder details below.


Custom Made Phone Mounts For Hundreds Of Different Vehicle Styles!

Find your mounts at A-Tach Mounts

A-Tach it to your dash!

For safety and convenience, it is best to have a secure mount and holder for your device in your vehicle. 

Suction cup holders, however, do not always hold with changing temperatures and are not legal in all states. The cheap taped on holders typically do not stick very well to textured dash surfaces and where they do stick is often not real convenient. Many who have tried those inexpensive vent louver holders find out they are loose and floppy, and it can become much more expensive to replace a broken vent. And Cup holders are for cups ... not phones. 

A-Tach Mobile Device Mounts are a better way!

  • Quick and easy to attach and use

  • Custom fit for the vehicle

  • Secure hold to the car and the device

  • High quality ABS plastic

  • No damage to the dash or device

This A-Tach vehicle mount is custom designed to fit in the location illustrated in the photos.  The mount quickly attaches securely onto the vehicle without the need to remove any panels or drill any holes. No special tools are required, and instructions are provided. A-Tach provides a photo of where the mount will attach onto the vehicle. A-Tach cannot know, however, if your specific device will fit the location illustrated. The customer or end user has both the vehicle and device and is the best person to determine most accurately if the mount is correct for the dash and if the specific device will fit and work where the mount is shown in the photo.

The mount comes with four small pre-drilled holes in an AMPS hole pattern and can be used with other brand device holders that have an AMPS hole pattern base. While the mount comes with pre-drilled holes, a device holder can be attached anywhere onto the face of the mount. Once the device holder has been attached onto the mount or the mount has been screwed into, the mount can no longer be returned for a refund as it is considered damaged and cannot be sold again as new.


About the Phone Holder options in the drop-down menu above.


A-Tach # 10101 

Universal Phone Holder - Elegant Style with 360 Ball Swivel

This Elegant style phone holder is ideal if you use wireless charging in your home but not in your vehicle. 

The holder will fit phone with these dimensions:

Minimum width 50 mm or 1 15/16 inches
Maximum width 90 mm cm or 3 5/8 inches
Maximum thickness 12 mm or 1/2 inches

Fits 4-6 inch mobile phone screens.

** Remember to consider the case when measuring your device.

Advantages of this holder:

  • Holds your phone securely in anti-slip rubber padding

  • Easy to use

  • One hand to close to secure the phone

  • One button touch to open to release the phone

  • Easy to attach

  • Tightens to lock in place

  • Tilts to many angles

  • 360-degree rotation

  • Device charging remains accessible

  • AMPS hole pattern base can be used with many vehicle mounts

  • Elegant styling

The holders can be used with smartphones and other devices that fit the dimensions listed.



*****************************


A-Tach # 10808


Magnetic Phone Holder - for all phones ... including wireless Charging Phones

This is a non-charging magnetic holder that will work on all phones, but it designed more specifically to work with wireless charging phones. 

Because wireless charging phones have a charging coil in the middle of the back of the phone, it is not recommended to place a thin metal disc required with magnetic holders in that location. This holder works with the metal ring that is already in many wireless charging phones. The ring of strong magnets on this holder goes around the charging coils and securely hold onto the internal metal ring in the phone. 

But what about the phones that do not have a built-in ring? Thats no trouble because this holder comes with a thin metal ring that can be attached onto the back of the phone or hard case. 

The holder is designed for phones as well as smaller tablets and also a device in a hard case. The holder has an incredibly strong magnetic hold to the device! This is a great holder for those larger iPhones.


NOTICE:  Cannot be used with a device in a silicone case 


This device holder uses a very thin metal ring that will need to be attached to the back side of your device or hard case if the device is in a case. 


Advantages of this holder:
  • HOLDS the device securely
  • Easy to use
  • Easy to attach
  • No device buttons pushed
  • Tightens to lock in place
  • Tilts to many angles
  • Includes a 360-degree ball and swivel rotation
  • Includes two thin metal rings for back of device
  • Device charging remains accessible
  • AMPS hole pattern base can be used with many vehicle mounts

** This item includes the Magnetic holder, two thin metal rings (one black and the other silver), a ball swivel and tightening ring along with 4 small screws for attaching a holder to a mount.


*****************************


A-Tach # 10850


No more plugging it in every time!

Magnetic and Wireless Charging ... the best of both worlds.

Upgrade your charging experience!

15W High Power Intelligent 1S Induction Charging System. Speeds up charging up to 200%. Charges even with a thick case! No need to remove the phone case, wireless transmission distance of 8mm, distance does not affect fast charging speed. Pads are made of soft rubber for anti-slip and anti-scratch protection.

NEW magnetic technology is built in!

Built-in rare earth magnets provide more efficient and stable pull to give your phone a secure hold. The magnetic north and south poles are assembled and arranged at intervals to form a closed magnetic field without interference. Will not interfere with cell phone navigation, signal, or wireless charging.

FOD Induction Charging 

Foreign body sensing technology plus a thermal sensor so you can recharge with confidence and safety. 

NOTICE: 
  • A very thick cases on your phone (such as an OtterBox) may not work with this item.
  • A thin steel ring is included for customers who have a phone that does not have a built-in ring for magnetic attraction. If the phone does not have a built-in metal ring, this thin metal ring will need to be attached onto the back of the phone or case if the phone is in a case.

Holder Advantages:
  • Magnetic
  • Security Protection
  • One-Hand Access
  • 15W Quick Charge
  • HOLDS the device securely in anti-slip rubber padding
  • Easy to use
  • Charges the phone in a case and within 8 mm
  • No device buttons pushed
  • Tightens to lock in place
  • Tilts to many angles
  • 360-degree rotation
  • AMPS hole pattern base can be used with many styles of vehicle mounts
  • Includes a 3-meter USB to USB C fast charging cable (USB is needed in the vehicle port)
  • Includes a QC 3.0 USB-C Car Charger Adapter - See link for details
Specs:

    Power: 15W, 10W, 7.5W
    Input: 5V/2A; 9V1.3A
    Output: 5V 3A /9V 2.22A
    Materials: ABS and Silicone
    Color: Black
    Transmission Distance: 8mm
    Charging efficiency: 75%
    Quality Assurance: 100% Tested before shipping

Compatible with all Qi 15W, 10W and 7.5W enabled phones

  

A-Tach solutions consist of two separate parts that are brought together to create a secure mounting solution. The first part is the vehicle mount and the second part is the device holder. The vehicle mount is specifically designed for the listed vehicle and is not designed to be attached and taken off the vehicle repeatedly or on a regular basis. Once the mount is attached, it should remain attached until you would like to permanently remove it. 


*****************************


A-Tach # 10500

Tablet Holder

This holder is designed to fit both smartphones and tablets. It is easy to use and will hold your device securely. 

Minimum device width: 5 1/2 inches or 138mm

Maximum device width: 11 inches or 280mm

Advantages of this holder:

  • HOLDS the device securely
  • Easy to use
  • Easy to attach
  • No device buttons pushed
  • Tightens to lock in place
  • Tilts to many angles
  • Includes a 360-degree ball and swivel rotation
  • Device charging remains accessible
  • AMPS hole pattern base can be used with many vehicle mounts
  • Folds down when not in use



A-Tach, phone mount, phone holder, car mount, car phone holder, car phone mount, truck phone mount, truck phone holder, cell phone car mount, vehicle mount, cell phone holder, phone holder, phone mount, phone holder for car, cell phone car mount, car phone holder