product properties:
●. Input voltage range AC100-240V. Wide voltage input, in line with the
global standard.
● Input voltage frequency:. 50-60Hz.
● Output voltage range:. 4.2V [optional 3.6V or 3.2V rechargeable
lithium iron phosphate lithium battery]
● Output current range:. 600 mA
● output voltage transfer rate: 5%
. ● termination voltage: 4.25V 1%
●. Output ripple & noise 100mVp-p. DC ripple, high efficiency, low
temperature, long life,
●. The efficiency of 70-85%. Small low-power design no-load power
consumption
●. Output short circuit protection built-in overcurrent. Overvoltage
protection
●. Operating temperature 0 ℃ ~ + 50 ℃.
●. Storage temperature -20 ℃ ~ + 85 ℃.
●. Humidity 10% -95% RH
●. 100% full load burn.
The main electrical performance:
* Using the latest optimization program, with perfect protection;
* Machine load power consumption (after fully charged or connected to
the battery market power but not placed) is only about 300mW;
* Charge mode: constant current constant voltage --- --- trickle charge;
To speed up the charging speed is constant current, constant
voltage charger is to make the output voltage is never higher than the maximum
battery voltage (so it will not overcharge); Trickle charge in order to make
the battery can be charged to a depth of saturation.
* For without protection board battery discharge charge having aortic
repair (only attempted repair, should try to avoid over-discharge. The faster
charging after the release, the greater the opportunity to repair), repair
process about 10 to 30 minutes (during light green), after the success of the
repair into the normal state of charge (red light);
* Operating status at a glance:
When the input power into the battery, if the battery performance
is normal, and placed the correct polarity, good contact, for the "green
light";
Charging - "red light", full - green light (red light
off)
Product advantages:
●. With perfect protection, short circuit, overload, overcurrent,
overvoltage protection, have CE FCC C-TICK certificates.
●. Good anti-jamming performance, high reliability.
●. Good DC ripple, high efficiency.
●. Low temperature, long service life.
●. Wide input voltage range, (90-264V) in line with the global standard.
●. Good insulation properties, high dielectric strength.
●. Overload, overvoltage protection.
●. Full load burn-in temperature, 100% burn-in test
Instructions for use:
1. Try to avoid using outdoors or in harsh environments, adapter is to
prevent exposure or damp.
2. When you do not use an adapter when Unplug. Because the adapter will
energize long been in working condition, it will affect the ultimate life.
3. Although the broadband adapter is operating voltage, marked from the
100V-264V can be, but if used at a voltage very unstable situation, it will
also cause damage to the power adapter
4, connected to the mains, the charger is not on the regular lights,
5. The battery icon will 18730/18650/16730/16650/14500/16340/CR123A
tank into the charger slot, the corresponding LED red light, indicating normal
charging; when fully charged, red light is off, the green light is lit, the
battery is fully charged, can be used.
1, indoor use is prohibited in temperature,
humidity, high magnetic field environments, do not expose it to rain or snow.
2, is strictly prohibited to charge the battery
leakage, so that the liquid flows into the damaged charger charger happen, do
not expired battery, counterfeit batteries.
3. Do not disassemble charger or contact charger
inside with metal objects in order to avoid electric shock.
4. If it is found by repeatedly charging the
battery, use of time more and more short-term, aging proof battery, replace the
battery.
5, the professional lithium battery charger charger,
battery charging can not be used for other purposes, if other types of
rechargeable battery can cause explosion, cracking or leakage, personal injury
or property damage, to avoid accidents peril.
6, do not expose the charger landing or place heavy
objects on it.
7, do not charge people living nearby.
8, children must be under adult supervision to use the
charger.
9 shall use the charger within the temperature range of 0
℃ ~ 40 ℃.
Charger should be stored in an ambient temperature of -10 ℃ ~ 50 ℃, clean, dry and ventilated room, should avoid contact with corrosive qualities, should stay away from fire and heat.