AGV Self Adhesive Magnetic Tape Robot Navigation Magnet Strips
- Rubber Magnetic Tape; Flexible Soft; Magnetic on one side and adhesive on the other side
- Material: Ferrite + Rubber
- Sizes (Width x Thickness): 30mm x 1.2mm / 50mm x 1.2mm
- Length: Sell by meter, 50Meter/Roll
- Features:This product is made of soft magnetic material. It is made of bonded ferrite powder and synthetic rubber by calendering. It is flexible, flexible and can be twisted. It is mounted with double-sided adhesive tape on the back. It is mainly laid on the ground as a magnetic route to guide the operation of AGV, AGC and trackless mobile shelves. This type of magnetic strip has strong flexibility, can be bent and folded, and does not damage the magnetism; It has strong plasticity and can be cut to the required length at will. The laying construction is simple and convenient. The circuit is easy to change. It can be used for AGV car navigation and magnetic station layout.
- Tips
1. The navigation magnetic strip can be connected with the iron floor, but it cannot be embedded in the iron floor, which will reduce the magnetism of the magnetic strip.
2. The navigation magnetic strip is close to other magnets, which may disturb the magnetic field distribution, so it is forbidden for strong magnetic objects to approach the navigation magnetic strip.
3. Iron powder, iron filings and other magnetic foreign matters sticking on the navigation magnetic strip may cause the change of magnetic flux density, which should be cleaned regularly.
4. The gap of the connecting part of the navigation magnetic stripe should be less than 2mm.
5. Keep the magnetic stripe away from chemicals and solvents (acetone, diluent, etc.), because these will change the shape and characteristics of the navigation magnetic stripe.
6. The magnetic strip cannot be trampled and rolled. It is recommended to cover the navigation magnetic strip with aluminum foil, PVC tape, cloth tape and other materials for protection.