Special "knife edge"standing seam" Toyota-Lexus pinch weld jacking ADAPTER for Rennstand.

Made to fit up to 2016 models and later models with two notches on the pinch weld.  Will not fit TNGA models with a downward "fin" on the pinch weld.

NO RENNSTAND IS INCLUDED.

Please read carefully: This a specialized CUSTOM "exact fit" ADAPTER for those who own Rennstand jack stands or who intend to purchase them. NO RENNSTAND OR ANY OTHER JACK STAND IS INCLUDED WITH THIS ADAPTER.

Made to work with "pinch weld" jacking points with two notches cars and crossover utility vehicles.  The most common pattern is the "knife edge" thin vertical flange that consist of two vertical edges spot welded together. Will NOT fit  less common "rounded" pattern with a welded downward FIN.

This ADAPTER matches the pattern of the OEM scissors jack consisting of two unequal sized contact points with the wider one placed toward the inner part of the body and is a perfect fit.

Using the wrong jack or pinch weld adapter will bend and damage the "knife edge" pinch weld.  The weight of the car with 'knife edge" pinch welds should correctly be supported by the reinforced pad behind the pinch weld, NOT by the 'knife edge."

Most ALL generic pinch weld adapters including the universal one supplied with Rennstands have grooves that are too shallow,  The car is supported on the bottom pf the slot by less than a quarter square inch of surface.  

The custom made adapter uses the best available materials for this application without regard to cost.  

 The "pinch weld" adapter is fabricated from a custom fine threaded hardened forged steel post threaded into  aerospace grade 6061-T651 aluminum angle screwed into a machined exceptionally durable UHMW "Spectra" ballistic grade block.  UHMW is the material of choice for high wear surfaces on industrial production lines..  

 The photos show this adapter used on a Generation 3 2012 Prius v with a SafeJack Rennstand.  It will, however, fit all Toyota "knife edge" pinch weld vehicles."

The pinch weld adapter is designed so the strong point on the inner side of the pinch weld is supported as the OEM scissors jack is designed to do, NOT on the "knife edge" of the pinch weld that could be damaged and bent.

This sale is for the custom fit close fit "knife edge" standing seam Lexus-Toyota pinch weld jacking adapter for Rennstands made by Safe Jacks, Rennstands USA and ETA Manufacturing.  They are sold individually ONE EACH. No other item or part shown in other representative photos or parts used for comparison is included.

Each one has been individually tested for fit and function.

Shipping and handling is by USPS calculated shipping to any location within the 50 United States. Please, PayPal payment only.  I ship FAST on the SAME or NEXT business day that I receive confirmed payment.