DC 120V 500A Wireless Battery Tester Voltage AMP AH SOC Power Capacity Detector

Popular

Product Introduction

Description:
    This Wireless Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours. The unit continuously monitors voltage, charge or discharge current, number of power, prevent over charge or over discharge, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure.
Read your battery bank like a fuel gauge.
Battery Status At A Glance.
Charging status indicator, looks like a smartphone.
Combines many functions in one, Dual display
Voltage (V), Current (A), Capacity (AH)
Power (W/KW), Energy (KWH)
Temperature (C), Working Hours (H)
By turning External device/Relay on and off, it can control external devices, such cut off Power input.
Trigger external Relay (Not included) when the reading reach preset value.
[OVP] Over Charge Voltage protection
[LVP] Over Discharge Voltage protection
[OCP] Over Discharge Current protection
[NCP] Over Charge Current protection
Come with a Through-hole Current transformer, it doesn't require shunt.
The current sensor can be placed on the Positive or Negative side of power.
Reverse polarity protection.
Doesn't require isolated power, self-powered 6-80V.
Nondestructive installation, it is very easy to install.

Power Supply  6~60V (external power supply)
Voltage Range  0.01~120V (external power), 6.00~80.0V (internal power)
Current Range ¹  depend on the size of hall sensor [1]
Capacity Range  0.001~65000.00 AH
Energy Range  0.000~9999 KWH
Time Range  0~100 Hours
Power Range  0~999 KW
Temperature  1~100 degree centigrade
 Display Type  2.4 inch LCD
 Sampling rate  5 readings per second
 Accuracy  Volt ±1%+2 byte / Amp±2%+5 byte
 Dimensions of Display  87mm×49mm×14mm
 Size of measuring module  114mm×54mmx28mm

 

 

 

 

 












 

Deal for use with
Used in cars, boats, motorcycle and Testing Devices for measuring voltage and current, Ah etc

Battery Protection, Prevent Over Discharge/Over Charge.
Used for Solar, Wind, HHO System
DIY battery discharge device.
Solar, Wind, HHO System

Package Included:
1PC×2.4 inch LCD Display (Receiver)
1PC×Measuring module (Emitter)
1PC×Hall sensor
1PC×Cable
1PC×English operation manual

 

 
  • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
  • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
DC 120V 500A Wireless Battery Tester Voltage AMP AH SOC Power Capacity Detector

Product Introduction

Description:
    This Wireless Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours. The unit continuously monitors voltage, charge or discharge current, number of power, prevent over charge or over discharge, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure.
Read your battery bank like a fuel gauge.
Battery Status At A Glance.
Charging status indicator, looks like a smartphone.
Combines many functions in one, Dual display
Voltage (V), Current (A), Capacity (AH)
Power (W/KW), Energy (KWH)
Temperature (C), Working Hours (H)
By turning External device/Relay on and off, it can control external devices, such cut off Power input.
Trigger external Relay (Not included) when the reading reach preset value.
[OVP] Over Charge Voltage protection
[LVP] Over Discharge Voltage protection
[OCP] Over Discharge Current protection
[NCP] Over Charge Current protection
Come with a Through-hole Current transformer, it doesn't require shunt.
The current sensor can be placed on the Positive or Negative side of power.
Reverse polarity protection.
Doesn't require isolated power, self-powered 6-80V.
Nondestructive installation, it is very easy to install.

Power Supply  6~60V (external power supply)
Voltage Range  0.01~120V (external power), 6.00~80.0V (internal power)
Current Range ¹  depend on the size of hall sensor [1]
Capacity Range  0.001~65000.00 AH
Energy Range  0.000~9999 KWH
Time Range  0~100 Hours
Power Range  0~999 KW
Temperature  1~100 degree centigrade
 Display Type  2.4 inch LCD
 Sampling rate  5 readings per second
 Accuracy  Volt ±1%+2 byte / Amp±2%+5 byte
 Dimensions of Display  87mm×49mm×14mm
 Size of measuring module  114mm×54mmx28mm

 

 

 

 

 












 

Deal for use with
Used in cars, boats, motorcycle and Testing Devices for measuring voltage and current, Ah etc

Battery Protection, Prevent Over Discharge/Over Charge.
Used for Solar, Wind, HHO System
DIY battery discharge device.
Solar, Wind, HHO System

Package Included:
1PC×2.4 inch LCD Display (Receiver)
1PC×Measuring module (Emitter)
1PC×Hall sensor
1PC×Cable
1PC×English operation manual

 

 
  • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
  • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques