Product Description
【Upgraded 0 Layer Design】0 Layer, easy installation, easy setup; Simply connect the batteries, and the controller will automatically determine the battery voltage. Multifunctional Backlight LCD display for displaying system operation information, customizable parameters, and error codes.
【Multiple Battery Adaptation】Automatically detects 12V, 24V, 36V or 48V DC system voltages, Compatibility with multiple battery types for convenient use: sealed lead-acid, flooded, gel or lithium batteries which must be deep cycle, which is suitable for RVs, Commercial Vehicles, Boats, Yachts, and any off-grid system.
【4-Stage Safely Charging】Features 4-stage charging : Bulk Charge, Boost Charge, Float Charge, and Equalization, for a rapid, efficient , safe battery charging, avoid too much gas precipitation or overheating of the battery.
【Full System Protection】Customizable charging voltages, Overcharging, over-discharging protection; Meant to safeguard your system, the self-diagnostic capability can assess and protect against PV Array Short Circuit; PV Overcurrent;Load Overload;Load Short Circuit;PV Reverse Polarity;Battery Reverse Polarity;Over-Temperature.
|
Models |
POW-M60-PRO |
|
Charging mode |
MPPT Maximum power point tracking automatically |
|
Charging |
3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge |
|
System type |
DC12V/24V/36V/48V Recognition automatically |
|
System voltage automatic recognition |
12V system (DC9V-DC15V) |
|
24V system (DC18V-DC29V) |
|
|
36V system (DC30V-DC39V) |
|
|
48V system (DC40V〜DC60V) |
|
|
Soft start time |
<1S |
|
Dynamic response and recovery time |
>98.1 % (Voc is 1.5 or 2 times than battery, then it's the best efficiency) |
|
PV utilization |
>99% |
|
Input specification |
|
|
VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it's the best efficiency.) |
12V system (DC20V〜DC80V) |
|
24V system (DC37V-DC105V) |
|
|
36V system (DC50V〜DC160V) |
|
|
48V system (DC72V〜DC160V) |
|
|
The maximum PV input voltage (Voc) |
DC190V(The controller can't work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.) |
|
The maximum PV input power (The total power rated of PV can't be over this watt that will break the controller.) |
12V system (720W) |
|
24V system (1440W) |
|
|
36V system (2100W) |
|
|
48V system (2800W) |
|
|
Output specification |
|
|
Selectable battery type(default is Sealed) |
Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) |
|
Absorption Charging Voltage |
Refer to Batteries charging reference |
|
Floating Charging Voltage |
Refer to Batteries charging reference |
|
Overcharging protection voltage |
12V system (15V) |
|
24V system (30V) |
|
|
36V system (45V) |
|
|
48V system (60V) |
|
|
Rated output current |
60A |
|
Temperature Coefficient |
±0.02%/ °C |
|
Automatic temperature compensation |
14.2V-(Max temperature-25 °C)*0.3 |
|
Output voltage ripple-peak |
100mv |
|
Output voltage accuracy |
<±1% |
|
Input Anti-intrusion protection |
yes |
|
Temperature Protection |
75°C |
|
Temperature increased protection |
Output power will reduce when it's more than 70 °C |
|
Output power will be normal when it's less than 55 °C |
|
|
Fan-on temperature |
>40 °C |
|
Fan-off temperature |
<35 °C |
|
Acoustic noise |
<40dB |
|
Cooling way |
Forced air cooling |
|
Components |
Imported materials, Accord to EU standards, Industrial grade range. |
|
Environmental requirements |
Meet 2002/95/EC; No cadmium, hydrides, and fluorides |
|
Security Level |
Accord to CE, PSE, FCC, EMC, EN60950 |
|
Electromagnetic Compatibility |
Accord to EN6W00, EN55022, EN55024 |
|
Enclosure |
IP21 |
|
Net weight(Kg) |
1.3 |
|
Gross weight(Kg) |
1.6 |
