Popular
Product Introduction
Features:
1. Support various types of batteries with a measurement range ranging from 1-30V.
2. High power terminal, Type-C interface power supply.
3. Full parameter automatic memory, user self calibration, Modbus communication control.
4. It has the function of automatically identifying battery categories and can manually correct the cut-off voltage for capacity testing.
5. It has various protection and diagnostic functions, including battery reverse connection, overvoltage, overcurrent, over temperature (-10 ℃~85 ℃), etc.
6. Suitable for assembling power adapter fully automatic aging or battery capacity testing.
Parameter:
Power supply voltage: DC 5V
Test voltage: 0.3V-30V
Voltage tolerance:<0.5% ± 0.02 (12 bit AD acquisition)
Current range: 0.1A-10A
Current tolerance:<0.5% ± 0.02
Maximum power: 300W
Capacity range: 9999Ah 9999min Stop if any value arrives first
Size: 65 * 52 * 20mm
Usage:
1. Capacity test (A-01): Connect the battery, press the OK button to display the XX.XX discharge cut-off voltage (the voltage light is on, unit V), switch to the setting position with the menu button, and change the value with the plus or minus buttons. Press the OK button to start the test. During the testing process, the test parameters (capacity, discharge time, current voltage, actual current, etc.) are displayed in a cycle. Press and hold the OK button to pause the test, readjust the cut-off voltage, and then press OK to start the test. After the test is completed, press the plus or minus button to switch the display parameters (capacity, discharge time, average voltage, discharge current, etc.), and press the OK button to return to the main menu.
2. Baud rate setting (A-02): Display bu-X baud rate (add and subtract buttons to change the value 1:9600 2:19200 3:38400 4:57600 5:115200) Press the OK button to display the address AXXX (1-255 menu button to switch settings, add and subtract buttons to change the value) Press the OK button to save the settings and enter the main interface.
3. Parameter calibration (A-03): Display u05.0, input the first calibration voltage, and connect the battery port to the calibration source through four wires (adjustable regulated power supply can be adjusted to a voltage of 5V). Press the OK key to display u15.0 and input the second calibration voltage (adjusted to 15V). Press the OK key to display A01.0, input the first calibration current, and connect the battery port to the calibration source through a four wire method (adjustable regulated power supply is sufficient, and the capacity tester can adjust the calibration source current value to 1A with the plus or minus keys). Press the OK key to display A03.0 and input the second calibration current (adjust the calibration source current value to 3A with the plus or minus keys). Press the OK key to complete the calibration.
4. Restore factory settings (A-04): After entering this mode, "----" will be displayed, and press the OK key to enter the main menu.
Package include:
Electronic load * 1
Resistance * 2
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Product Introduction
Features:
1. Support various types of batteries with a measurement range ranging from 1-30V.
2. High power terminal, Type-C interface power supply.
3. Full parameter automatic memory, user self calibration, Modbus communication control.
4. It has the function of automatically identifying battery categories and can manually correct the cut-off voltage for capacity testing.
5. It has various protection and diagnostic functions, including battery reverse connection, overvoltage, overcurrent, over temperature (-10 ℃~85 ℃), etc.
6. Suitable for assembling power adapter fully automatic aging or battery capacity testing.
Parameter:
Power supply voltage: DC 5V
Test voltage: 0.3V-30V
Voltage tolerance:<0.5% ± 0.02 (12 bit AD acquisition)
Current range: 0.1A-10A
Current tolerance:<0.5% ± 0.02
Maximum power: 300W
Capacity range: 9999Ah 9999min Stop if any value arrives first
Size: 65 * 52 * 20mm
Usage:
1. Capacity test (A-01): Connect the battery, press the OK button to display the XX.XX discharge cut-off voltage (the voltage light is on, unit V), switch to the setting position with the menu button, and change the value with the plus or minus buttons. Press the OK button to start the test. During the testing process, the test parameters (capacity, discharge time, current voltage, actual current, etc.) are displayed in a cycle. Press and hold the OK button to pause the test, readjust the cut-off voltage, and then press OK to start the test. After the test is completed, press the plus or minus button to switch the display parameters (capacity, discharge time, average voltage, discharge current, etc.), and press the OK button to return to the main menu.
2. Baud rate setting (A-02): Display bu-X baud rate (add and subtract buttons to change the value 1:9600 2:19200 3:38400 4:57600 5:115200) Press the OK button to display the address AXXX (1-255 menu button to switch settings, add and subtract buttons to change the value) Press the OK button to save the settings and enter the main interface.
3. Parameter calibration (A-03): Display u05.0, input the first calibration voltage, and connect the battery port to the calibration source through four wires (adjustable regulated power supply can be adjusted to a voltage of 5V). Press the OK key to display u15.0 and input the second calibration voltage (adjusted to 15V). Press the OK key to display A01.0, input the first calibration current, and connect the battery port to the calibration source through a four wire method (adjustable regulated power supply is sufficient, and the capacity tester can adjust the calibration source current value to 1A with the plus or minus keys). Press the OK key to display A03.0 and input the second calibration current (adjust the calibration source current value to 3A with the plus or minus keys). Press the OK key to complete the calibration.
4. Restore factory settings (A-04): After entering this mode, "----" will be displayed, and press the OK key to enter the main menu.
Package include:
Electronic load * 1
Resistance * 2
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.