Three Phase Power Quality Analyzer Meter 3 phase Power Energy Meter Analyzer
Features:
- 5.6 inch display
- 4 current clamp sensor
- 4-channel current and voltage measurement
- Automatic shut-down; Backlight function
- Transient capture function
- Trend chart recording and storing function
- Alarm function; Snapshot function
ETCR5000 Power Quality Analyzer's Basic Function:
1. Transient capture function
- Monitoring instantaneous change of power grid voltage current parameters, including the voltage current fluctu-ations, voltage current surge, sag and short supply interruption, temporary overvoltage, impact current and Cur-rent voltage instantaneous distortion.
- Instruments can store 150 sets of transient waveform at the same time.
2. Starting current monitoring
- Monitoring surge current of line and the startup current when electrical equipment is starting, help to correctly design capacity.
- Can be display the RMS rising / falling curve In the startup process, the envelope curve of startup current, waveform of 4 channels current and 4 channels voltage.
- Recording about 100s after trigger, storage the current /voltage instantaneous and waveform curve of each cycle in 100s.
3. Trend chart recording and storing function
- Store all the test parameters of basic test functions (Urms, Uthd, Ucf, Uunb, Hz, Vrms, Vthd, Vcf, Vunb, PST, Arms, Athd, Acf, Aunb, KF,W, VAR, VA, PF, COSφ, TANφ),50 voltage harmonics, 50 current harmonics. And create the trend curve.
- Record data for a long time according to need(concurrent selection 20 parameters to record data for once every five seconds, you can record about 300 days.).
4. Alarm function
- Set the limit values according to need, monitoring the values whether overshoot, if overshoot will generate an alarm log, such as: voltage, current, unbalance, harmonic ratio, frequency, active power, total harmonic distor-tion.
- You can configure 40 different alarms, each group can set different monitoring parameters (including 50 harmonics, total of 123 different parameters) and limit values, also can set the shortest time of overshoot.
- The log can contain up to 12,800 alarms.
5. Snapshot function
- Any screen can be saved (screen snapshot), at the same time automatically records the time and test mode.
- Such as can save voltage and current waveform, harmonic bar chart, phasor diagram etc.
- It can save a maximum of 60 screen snapshot.
6. Communication function
- Communicate with computer via USB;
- Monitoring software can display waveform of power quality analysis, read of the transient waveform, trend chart recording, alarm log, screenshots, and display on the computer.
7. Setting function
- The user can configuration of the time and date, configuration of the screen contrast and brightness, definition of each phase curve colors.
- Choice of type of connection to the net work.
- Configuration of the type of the current sensors and voltage ratios.
- Select Chinese menu or English menu.
8. Help menu in Chinese/English
- Every stage of operation can press the "help" key to obtain relevant information.
Specification:
Power Supply | Rechargeable lithium battery pack 9.6V, external charger. |
Battery indicator | Battery symbol 5 grid Show the power, when the battery power is too low, prompted 1 minutes after the automatic shutdown. |
Working current | Current 490mA, the battery is full of electricity for about 8 hours of continuous work. |
display mode | LCD Color screen, 640dots * 480dots, 5.6 inch display domain 116mm * 88mm. |
Clamp size | 008B: φ8mm; 040B: φ40mm; 068B: φ68mm; 300F: φ300mm |
Instrument size | 240mm*170mm*68 mm. |
Total Weight | 6KG |
Channel number | 4-CH voltage, 4-CH current. |
Line voltage | 1.0V~2000V. |
Phase voltage | 1.0V~1000V. |
Electric current | 008B/040B/068B/300F Current clamp |
frequency | 40Hz~70Hz. |
Electric quantity parameter | W, VA, Var, PF, DPF, cosφ, Tanφ |
Electric energy parameters | Wh, Varh, Vah. |
Harmonic | Yes, 0~50 times. |
Total harmonic distortion | Yes, 0~50 times, each phase. |
Expert mode | Yes. |
Transient recording | 150 Groups. |
Voltage flicker | Yes. |
Starting current mode | Yes, 100 seconds. |
Three-phase unbalance degree | Yes. |
Record | 300Day (record 20 parameters simultaneously, 1 points per 5 seconds). |
Min / Max Record value | There are, can be measured for a period of time the maximum and minimum value. |
Give an alarm | 40Different types of parameter selection, 12800 groups of alarm log. |
Peak value | Yes |
Phasor diagram display | Automatically. |
Screenshot capacity | 60A. |
Menu language | English and chinese. |
Communication interface | USB |
Automatic shutdown | In the alarm / trend chart recording / transient capture mode (waiting or in the middle), the instrument does not automatically shut down. |
In other test mode, no button operation within 15 minutes, 1 minutes after the automatic shutdown. | |
Backlight function | There is, for the dark places and at night. |
Voltage test line | 3m |
Current clamp length | 2m |
Working temperature and humidity | -10C~ 40 degrees C; 80%Rh below. |
Storage temperature and humidity | -10C~ 60 degrees C; 70%Rh below. |
Input impedance | The input impedance of the test voltage is 1M. |
Pressure | The instrument circuit and the outer shell withstand 3700V/50Hz sine wave alternating current voltage for 1 minutes. |
insulation | Between the instrument line and the jacket shell is larger than 10M. |
structure | Double insulation with anti-insulation vibration jacket. |
Safely Standard | IEC 61010 1000V Cat III / 600V CAT IV, IEC61010-031, IEC61326, Pollution degree: 2. |
Accessories | Host: 1PCS; Instrument Bag: 1pcs; Test Cable: 5PCS (yellow, green, red, blue, black); Alligator Clip: 5PCS; Probe: 5PCS; Charger 1PCS; Software CD: 1COPY; Optional Current Clamp: 4PCS |
Parameters of current clamps:
Model | 008B | 040B | 068B | 300F |
Function | AC current and leakage detection | |||
Test model | Clamp CT, Current induction output | |||
Clamp size | Φ8mm | Φ40mm | Φ68mm | Φ300mm |
Current range | AC 10mA~10.0A | AC 0.1A~100A | AC1.0A~1000A | AC10A~6000A |
Resolution | 0.1mA | |||
Accuracy | 0.5% (23℃±3℃, below 70%RH) | |||
Current transform | Around 1A/1mA | |||
Circuit voltage | Lower than AC600V | |||
Cable length | 2m | |||
Working environment | -20℃~50℃; below 80%RH | |||
Storage environment | -10℃~60℃; below 70%RH | |||
Weight | 170gX4 | 190gX4 | 510gX4 | |
Package:
- 1x ETCR5000 Power Quality Analyzer
- 4x Current Clamps (4 types Optional)
- 5x Test Cable (yellow, green, red, blue, black)
- 5x Alligator Clip
- 5x Probes
- 1x Charger
- 1x Software CD
- 1x Instrument Bag