John Deere 2950 Tractors Technical Manual
Includes OEM John Deere Binder
OEM Part Number: TM-4407 April 1986
The John Deere 2950 is a 2WD or 4WD utility tractor from the 2050
series. This tractor was manufactured by John Deere in Mannheim,
Baden-Württemberg, Germany from 1983 to 1988. The John Deere 2950 is
equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and one
of two transmissions: a partial power shift transmission with 16 forward
and 8 reverse gears or a partially synchronized transmission with 12
forward and 8 reverse gears.
The John Deere 2950 utility tractor used the John Deere engine. It is a
5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder natural aspirated diesel
engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33
in) of the piston stroke. The compression ratio rating is 17.4:1. This
engine produced 86.2 PS (63.4 kW; 85.0 HP) at 2,500 rpm of PTO output
power.
The JD 2950 is equipped with power steering, differential hydraulic wet
disc brakes, two-post ROPS (canopy or Sound-Gard cab with heat and
air-conditioning was available as an option), and 122.3 liters (32.3 US
gal.; 26.9 Imp. gal) fuel tank.
This is the Highly Detailed factory service repair manual for the John
Deere tractor, this Service Manual has detailed illustrations as well as
step by step instructions,It is 100 percents complete and intact. they
are specifically written for the do-it-yourself-er as well as the
experienced mechanic. John Deere Service Repair Workshop Manual provides
step-by-step instructions based on the complete dis-assembly of the
machine. It is this level of detail, along with hundreds of photos and
illustrations, that guide the reader through each service and repair
procedure.
Contents
Group 00 – Specifications and Special Tools
Group 05 – Pre-delivery, Delivery and Aftr-Sales Inspections
Group 10 – Lubrication and Periodic Service
Group 15 – Engine and Tractor Tune-Up
Group 20 – Tractor Separation
SECTION 20 – ENGINE
Group 00 – Specifications and Special Tools
Group 05 – General Information, Diagnosing Malfunctions
Group 10 – Cylinder Head, Valves and Camshaft
Group 15 – Cylinder Block, Liners, Pistons and Connecting Rods
Group 20 – Crankshaft, Main Bearings and Flywheel
Group 25 – Timing Gear Train
Group 30 – Engine Lubrication System
Group 35 – Engine Cooling System
SECTION 30 – FUEL AND AIR INTAKE SYSTEM
Group 00 – Specifications and Special Tools
Group 05 – General information, Diagnosing Malfunctions
Group 10 – Fuel Tank, and water trap
Group 15 – Cold Weather Starting Aid
Group 20 – Speed Control Linkage
Group 25 – Air Cleaner
SECTION 40 – ELECTRICAL SYSTEM
Group 00 – Specifications and Special Tools
Group 05 – Description, Diagnosing Malfunctions and Tests
Group 06 – Connector Repair
Group 10 – Wiring Harnesses
Group 15 – Controls and Instruments
Group 20 – Lighting Systems
Group 25 – Wiring Diagram
Group 30 – Starting Motor
Group 35 – Alternator
SECTION 50 – POWER TRAIN
Group 00 – Specifications and Special Tools
Group 05 – Description, Operation and Lubricating System
Group 10 – Clutch Operating Linkage
Group 15 – Engine Clutch
Group 20 – Hi-Lo Shift Unit
Group 25 – Creeper Transmission
Group 30 – Transmission Shift Linkages
Group 35 – Synchronized Transmission and Transmission Oil Pump
Group 40 – Differential
Group 45 – Final Drives
Group 50 – Independent PTO
Group 55 – Mechanical Front Wheel Drive
SECTION 60 – STEERING SYSTEM AND BRAKES
Group 00 – Specifications and Special Tools
Group 05 – Power Steering
Group 10 – Brakes
SECTION 70 – HYDRAULIC SYSTEM
Group 00 – Specifications and Special Tools
Group 05 – Description, Diagnosing Malfunctions and Tests
Group 10 – Oil Reservoir, Filter, Valves and Oil Cooler
Group 15 – Hydraulic Pump
Group 20 – Rockshaft
Group 25 – Selective Control Valves (Poppet Valve Type) and breakaway Coupler
Group 26 – Selective Control Valves (Spool Type) and Quick Coupler
Group 30 – Remote Cylinder
SECTION 80 – MISCELLANEOUS
Group 00 – Specifications and Special Tools
Group 05 – Front Axle
Group 10 – Front and rear Wheels
SECTION 90 – OPERATORS STATION
Group 00 – Specifications and Special Tools
Group 05 – Air conditioning system
Group 10 – Cab ventilation and heating
Group 15 – Seats
Group 20 – Sound-Gard Body
Group 25 – Roll-Gard Protective Structure
Excellent condition
Shipping weight: 3.5 kg
Approx 1500 pages