![]() |
As a fuel Injector tester cleaner tool,when the injector is clogged, you can use it to save expensive nozzles,our fuel injector tester may be used with any fuel pressure gauge/ tester. Injector tester is powered by 12V battery or an external DC 12V (recommended at least 1.5A) power adapter. When the current is switched on, the solenoid valve in the nozzle is opened. Meanwhile cleaning liquid flush through white tube by liquid pressure in cleaner bottles, then through injector to clean it.NOTE: Gasoline car only, NOT the diesel engine. |
![]() |
8 Pulse Modes (Mode 1 - Mode 8) Mode 0: Standby State, no output Mode 1: Single Pulse Low Power Mode: the fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds. Mode 2: Short Pulse Low Power Mode: the fuel injector tester will send out 50 pulses with a pulse width of about 7 milliseconds. Mode 3: Long Pulse Low Power Mode: the fuel injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds. Mode 4: Continuous Pulse Low Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds. Mode 5: Single Pulse High Power Mode: the fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds. Mode 6: Short Pulse High Power Mode: the fuel injector tester will send out 50 pulses with a pulse width of about 7 milliseconds. Mode 7: Long Pulse High Power Mode: the fuel injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds. Mode 8: Continuous Pulse High Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds. NOTE: During the pulse output period, the MODE SET button is invalid, and the working mode can only be selected by pressing the PULSE button again to terminate the output. |
![]() | ![]() |
Can Test 2 Injectors at the Same Time Compared with other injector cleaning kit on the market that can only test 1 injector, our injector tester has a special four-wire dual-channel design which can test 2 injectors at the same time(new and old injectors can form a sharp contrast). | 4 Injector Cleaner Adapters The fuel injector tester cleaner kit is equipped with 4 white tube adapters (2 big and 2 small)for connecting the injector nozzle and car cleaning liquid flush. These two fuel injector cleaner adaptor fits 2 different size fuel injectors and can easily clean almost all types of car motorcycle fuel injectors( except Cylinder Direct-Injection Nozzle). |
![]() | ![]() |
Output Short Circuit Protection It has a new output short circuit protection function.If the injector is damaged or the pulse output terminal is short-circuited,the power indicator will flash. | Power Input Reverse Connection Protection Function It also includes a power input reverse connection protection function.In addition,it can be modified for relay testing or solenoid valve testing. |
![]() | ![]() | Power supply: 12V battery or DC 12V (recommended 2A) power adapter Package Include: 1 x Fuel Injector Tester 1 x Carrying Bag 1 x User manual 2 x Battery clips 4 x Injector Adapters 4 x Pulse Output Terminal Test Wires |