Handheld LCR Bridge Digital LCD Capacitance Inductance Resistance Meter Tester

Product Introduction

Hightlight:
1: With open circuit and short circuit calibration function
2: Provide system settings, Chinese or English, buzzer, screen brightness, etc. can be configured according to needs
3: Powered by a large-capacity lithium battery
4: With open circuit, short circuit calibration function
5: Provide a variety of test ports
 
Product Description:
The ET43 series handheld electric bridge integrates a 2.8-inch TFT display, flexible and convenient button operation and USB full-speed communication; a large-capacity lithium battery can ensure long-term work. In terms of function, it not only has comprehensive measurement parameters, but also can perform deviation measurement and screening, and the output frequency is continuously adjustable; in terms of performance, the basic accuracy is up to 0.2%.
 
Features:
 The measuring frequency is up to 100kHz, and the stepping is continuously adjustable at 1Hz;
Basic accuracy: 0.2%;
Internal configuration voltage output: 0mV-500mV;
Support DC resistance (DCR), electrolytic capacitance measurement function;
The components are connected to the automatic identification and measurement function;
 Manual and automatic range, the measurement speed can be adjusted;
With open circuit and short circuit calibration function;
Support screening and deviation measurement;
2.8-inch TFT display, 4 and a half digits display, large-capacity lithium battery power supply;
USB communication interface, support SCPI protocol;
 Provide system settings, Chinese or English, buzzer, screen brightness, etc. can be configured according to needs;
 Provide a variety of test ports; 
 
ET430
ET431
ET432
ET433

Package Checklist
1*Tester
  • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
  • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Handheld LCR Bridge Digital LCD Capacitance Inductance Resistance Meter Tester

Product Introduction

Hightlight:
1: With open circuit and short circuit calibration function
2: Provide system settings, Chinese or English, buzzer, screen brightness, etc. can be configured according to needs
3: Powered by a large-capacity lithium battery
4: With open circuit, short circuit calibration function
5: Provide a variety of test ports
 
Product Description:
The ET43 series handheld electric bridge integrates a 2.8-inch TFT display, flexible and convenient button operation and USB full-speed communication; a large-capacity lithium battery can ensure long-term work. In terms of function, it not only has comprehensive measurement parameters, but also can perform deviation measurement and screening, and the output frequency is continuously adjustable; in terms of performance, the basic accuracy is up to 0.2%.
 
Features:
 The measuring frequency is up to 100kHz, and the stepping is continuously adjustable at 1Hz;
Basic accuracy: 0.2%;
Internal configuration voltage output: 0mV-500mV;
Support DC resistance (DCR), electrolytic capacitance measurement function;
The components are connected to the automatic identification and measurement function;
 Manual and automatic range, the measurement speed can be adjusted;
With open circuit and short circuit calibration function;
Support screening and deviation measurement;
2.8-inch TFT display, 4 and a half digits display, large-capacity lithium battery power supply;
USB communication interface, support SCPI protocol;
 Provide system settings, Chinese or English, buzzer, screen brightness, etc. can be configured according to needs;
 Provide a variety of test ports; 
 
ET430
ET431
ET432
ET433

Package Checklist
1*Tester
  • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
  • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques