PD65W Fast Charging Module Type-C Interface PD3.1 PPS Fast Charging QC3.0 Hu ZC
Features: Support PD3.1 (PPS), QC3.0, SCP With protection function, input over-voltage and under-voltage protection, input over-current protection, output over-current short-circuit protection, over-temperature protection of the whole machine Maximum output 20V 3.25A Input 8~30V (only step-down) DC models are divided into 5521 and 5525, 5521: outer diameter 5.5mm, inner diameter 2.1mm; 5525: outer diameter 5.5mm, inner diameter 2.5mm.
Product parameters: Input voltage: DC 8~30V Output voltage: Automatically adjust between 3.3V~21V when connected to a TYPE-C compatible power receiving device (the input voltage must be higher than the output voltage, if you want to trigger 20V fast charging, the input voltage must be higher than 20v) Output power: maximum 65w (5V3A, 9V3A, 12V3A, 20V3.25A, etc.) Maximum output: 20V 3.25A Conversion efficiency: 92%~97% Output voltage ripple: <200mV No-load current: <3mA Input overvoltage and undervoltage protection Input overcurrent protection Output over-current short-circuit protection Machine over-temperature protection Supported charging protocols: PD3.1 (PPS), QC3.0, SCP
Supported charging protocols: BC1.2, IOS agreement Qualcomm QC2.0 and QC3.0 Huawei Fast Charge Protocol FCP and SCP Product application: all kinds of power supply transformation fast charge output
Instructions for use: When using a 20~24V power adapter as the input, it is recommended to power on the power supply first before connecting to the module, otherwise there may be errors in the matching power of the module due to the slow power-on of the power supply, and the output of 65W cannot be achieved. Product temperature rise and output ripple: Test conditions: the input voltage is 24V, the ambient temperature is 24°C, the load is a notebook computer that supports PD65W (the power is about 50%), and the computer runs a stress test to ensure that the power at the power supply end is 65w.