Item as;
1 x Intel SE7221BK1-E motherboard only (as show in pictures except random serial number)
Spec.;
Supported Processors for Intel® Entry Server Board SE7221BK1-E and Intel® Entry Server System SR1425BK1-E
Intel® Entry Server Board SE7221BK1-E and Intel® Entry Server
System SR1425BK1-E are designed to support Intel® Pentium® 4 Processors
operating with an 800 MHz system bus speed and Intel® Celeron® D Processors
operating with a 533 MHz system bus speed.
Manufacturer: Intel Motherboard size: 12” x 9.6”
Intel® E7221 chipset components -
GMCH integrated graphics controller in GMCH component (Intel® GMA 900)
Processor and Front Side Bus (FSB) support - Supports single Intel® Pentium® 4 and Celeron® processors in an LGA775 package - Capable of 800 MT/s on system bus - Supports Hyper-Threading Technology - Supports Intel® Extended Memory System 64 Technology (EM64T)
Processor Family Package Type Frequency Cache Size Front Side Bus Pentium® 4 LGA775 3.0 - 3.8 GHz 2MB L2 800MHz Pentium® 4 LGA775 2.8 - 3.8 GHz 1MB L2 800MHz Celeron® D LGA775 2.26 - 2.93 GHz 256K L2 533MHz Note: The Pentium® 4 Processor Extreme Edition IS NOT supported for use with the Intel® Server Board SE7221BK1-E.The board is designed to provide up to 120A of processor current. Processors with higher current requirements are not supported. For a complete list of all supported processors, please visit the Intel® Server Board SE7221BK1-E support site located at the following URL: http://support.intel.com/support/motherboards/server/sb/CS-012690.htm
Memory Support: 4
DIMM sockets supporting 400/533MHz DDR2 DIMMs - Data bandwidth per channel of
4.2GB/s or 8.5GB/s in dual channel when using DDR2 533MHz -Support for up to
two DDR2 channels for a total of 4 DIMMs (2 DIMMs /Channel) providing up to 4GB
max memory capacity. -Support for 256MB, 512MB, 1GB and 2GB DRAM sizes DIMM and
memory configurations must adhere to the following: DDR2 400/533 , un-buffered, DDR2 DIMM modules DIMM organization: x72 ECC or x
64 Non-ECC Pin count:
240 DIMM
capacity: 256 MB, 512 MB, 1 GB DIMMs Serial PD: JEDEC Rev 2.0 Voltage options: 1.8 V STORAGE CONTROLLER: RAID Level:
RAID 0, RAID 1, RAID 10 Storage
Interface: ATA-100 -connectors: 1 x 40pin IDC, SATA-150 -connectors: 4 x 7pin
Serial ATA Internal Interfaces: 1 x
floppy SATA interface:
The ICH6R contains four SATA ports. The data transfer rates up to
150Mbyte/s. Network
Interface Controller (NIC): The Intel® Server Board SE7221BK1-E
supports two 10Base-T/100Base/1000Base-T (82541PI controller) network
interfaces. One is through ICH6R directly, and another one is through PXH
(SE7221BK1LX sku only). Graphics Processor: Intel GMA
900
Please feel free
contact us for any question, Thank you!