BMC Performance Air Filter - FB555/01
The panel air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).
BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
| Dimensions: | Part Number: | OEM Part Number: |
|---|---|---|
| 204mm x 213mm |
FB555/01 | VAUXHALL 13357497 VAUXHALL 13442297 VAUXHALL 13452141 OPEL 30932998 GENERAL MOTORS (GM) 39032998 FIAT GROUP 51830174 FIAT GROUP 51925537 FIAT GROUP 55184249 OPEL 834656 OPEL 834778 OPEL 834848 OPEL 834849 OPEL 834926 GENERAL MOTORS (GM) 93188723 VAUXHALL 95513087 GENERAL MOTORS (GM) 95516129 |
HIGHEST QUALITY
The BMC air filter is composed of a metallic mesh containing an oiled multilayer cotton filtration material. This guarantees a high level of filtering efficiency and a limited loss of air pressure. The oil used gives the material its “sticky” adhesive characteristic which aids in the retention of air impurities without compromising or blocking air flow penetration. This also creates a continuous filtering process. The cotton filtrating element is contained within an external support frame which interfaces with the air-box and allows it to be securely installed. Every stage of the production process, from design to manufacturing, is carried out in Italy by Italian engineers and uses the finest quality materials.
ECOLOGICAL AND ECONOMICAL
BMC air filters are made of cotton, a natural material which can be reused several times. The air filter can be washed with a special detergent then re-oiled, thereby saving the cost of changing the air filter each time the vehicle is serviced and thus reducing environmental waste.
RIGOROUS TESTING
BMC operates in a number of areas: automotive, racing, aerospace, nautical and industrial, and according to the specific regulations and requirements of each sector. Consequently, BMC air filter testing is rigorous and thorough thereby ensuring a higher quality in respect to paper, foam and plastic materials. The technical solutions used by BMC are derived from the results of a continuous and intense programme of laboratory testing. BMC carries out filtration tests in accordance with the international standards for filtering (ISO 5011). BMC Air Filters have a 98.5% filtering efficiency in respect to this standard.
HOW IS A BMC FILTER REGENERATED
We recommend using original BMC kits only, as other products may not be effective or may damage the filter permanently, thus invalidating the warranty.
The kit includes the special BMC detergent and an oil applicator (in the spray or dispenser version).
We recommend regenerating the filter (washing + oil application) every 20.000 – 25.000 km to ensure best performance and long service life.
This value is a rough estimate and can vary based on the climatic conditions and the ground on which the vehicle is used (sand, dirt roads, etc.).
The various steps to be carried out in order to regenerate the filtering element are indicated in the instructions contained in the regeneration kit.