Quantity |
4 Pieces for 4 Wheels |
Torque Specs |
130NM(95.8 Ft tb) |
Vehicle Bolt Pattern(PCD) |
5x114.3MM / 5x4.5" |
Hub Centric | Yes |
Wheel Bolt Pattern(PCD) |
5x114.3MM / 5x4.5" |
Material |
Forged Billet 7075-T6 Aluminum |
Thickness |
30MM / 1.18" inch |
Minimum Number of turns for Bolts/Nuts |
8 Turns |
Center Bore(CB) |
63.4MM |
Fit Models |
Ford Explorer 2011+ |
Thread Pitch |
1/2"-20 |
Color Choice |
Black Anodized |
Stud Grade |
10.9 Grade Tested |
Brand |
BLOXSPORT |
Please check the following compatible models for this item:
2011-2019 - Ford - Explorer
>> Hub Centric Design--NO VIBRATION
However, with a non-hubcentric wheel spacer, the weight of the car is no longer on the locating ring and is now on the studs, it more easily cause vibrations from the wheels, and studs bear all weight of the car. That doesn't mean you can't choose non-hubcentric wheel spacer, but just confirm the studs are in good quality.
10 years warranty -- Forged Aluminum 7075-T6
As the picture show you, The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety. BLOXSPORT insist on using the forged material, insist on the conception of putting safety in the first place and reject to use the casting material.
Forged parts had a 26% higher tensile strength than the cast parts. This means you can have stronger shackles at a lower part weight.
Forged parts have a 37% higher fatigue strength resulting in a factor of six longer fatigue life. This means that a forged shackle is going to last longer.
Bolt/Stud affects the safety performance directly, so they are very important accessories. The good product is always along with the test report and can bear series of test.
As the picture show you, the ordinary stud has not the flexibility and anti-fatigue performance is too bad, easily being snapped off after long-term use. BLOXSPORT bolts/studs have passed test, ISO3800, 1 million time anti-fatigue test(German standard),and our bolts/studs/lug nuts used Heat-Treatment working processes to improve their performance to make sure the safety during long-term use.
>> CNC Machined - Professional Measurement
The wheel spacers were modern CNC machined, the surface was more smooth, increasing car driving more stable and more secure and no vibration. 0.02mm Machining precision, the consummate data comes from constant practice, BLOXSPORT always make perfection more perfect.
>> How Thick Should your car fit?
Before you buy, please confirm that this is the thickness you
need. If you not sure which thickness you can install for your car,
please use the measuring device to measure from the inside of the
straight edge to the inner fender lip as below showing.
Item Benefits:
Product effect:
>> Factory Shows
BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.).
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).