Knurling tools
Please choose from the drop down menu which type of knurling tool and wheels you require
Options available
1 wheel knurling tool
2 wheel Pivot Head knurling tool
2 wheel clamp type knurling wheel
2 Wheel scissor type knurling tool
6 wheel knurling tool
Spring Loaded Clamp Type Knurling Tool 2" Capacity With One Pair extra Knurls
V Clamp Type Knurling Tool Holder 5-20 mm Capacity For Mini Lathe
Diamond Shaped Medium Knurling Wheel( pair)
Spare knurling wheels fine, medium and coarse, these come in pairs of 2, and will fit all knurling tools EXCEPT the 1 wheel knurling tool
Knurling clamp arms can be moved to increase or reduce the maximum capacity.
The clamp design allows each knurl to contact the work piece on opposite sides so that minimum force is exerted onto the work piece.
PLEASE NOTE: Not suitable for CJ18A as cross slide on the lathe at its start position does not allow for the knurler to be centered on the workpiece.
Will work on the CJ18A if you are preapred to do some modifcations on it yourself.
2) CLAMP TYPE KNURLING TOOL
SHANK SIZE 15MM X 8MM
Holder Size:- 5/8" x 3/8" x 3"
Knurl Dimension:- 3/4" x 3/8" x 1/4"
HEAD SELF ADJUSTS TO CENTRE HEIGHT
HEAD CLAMPS ON WORK BY THE KNURLED NUT ON THE TOP OF THE HEAD,
A QUALITY TOOL, CAPACITY 1 1/2"
DESCRIPTION:
Hardened Steel Knurls for longer life comes fitted in Knurling holders.
Knurling pressures absorbed by knurling tool. No pressure on lathe, compound, centers or feed screw. Fast set-up. Knurling pattern is clean and sharp, with no double tracking.
Shank: 1/2" x 5/8"
Length: 6"
Capacity: 1/16"-2 1/4"
Includes 3/4" Medium Diamond Knurls
OTHER TYPE OF KNURLING TOOL IN OUR EBAY SHOP !
4) V Clamp Type Knurling Tool Holder 5-20 mm Capacity For Mini Lathe
DESCRIPTION
Tool Capacity Ranges from 5mm To 20mm
Shank Size: 10mm x 10mm x 50mm Long
Knurl Size: 3/4" x 3/8" x 1/4" (left medium & right medium)
Fully adjustable, spring loaded / clamp type knurling tools for reduced load when knurling.
Can be clamped in standard holder of the quick change tool post on lathe.
Also compatible with Myford, Boxford, ML7 series & other similar size lathes
The revolving head is fitted with standard left and right pattern knurls in fine, medium and coarse pitch. Any pair can be brought to bear on the work-piece, thus 3 different knurling patterns are obtainable without changing the tool.
6) 6 Knurls Lathe Knurling Tool Holder Rotating Head Multi Knurl Coarse 5"
3 PAIRS OF KNURLING WHEELS
FINE MEDIUM COARSE
SIMPLY REVOLVE HEAD TO PAIR OF WHEELS REQUIRED & LOCK
Holder Size :- 5/16" x 3/4" x 5" Knurl Size: 5/8" x 5/16" x 7/32"
SHANK CAN BE REDUCED EASILY FOR SMALL LATHE
7)Single Knurl knurling Tool Holder 3/4" x 3/4"x 5" DESCRIPTION Holder Size: 3/4" x 3/4" x 5" Knurl Dimensions: 3/4" x 3/8" x 1/4" (19mm x 9.5mm x 6.35mm) 8) Knurling wheels diameter 3/4" Width 3/8" 3/4" x 3/8" x 1/4" |
Before signing the receipt slip upon delivery kindly check the product in-front of the delivery person for any damages if caused during transit. Do not sign the receipt slip and kindly return the parcel in-case you find the product in damaged condition due to mishandling, we will take care of all claims with the delivery company.