This X10 3-Prong Appliance Module comes with Automatic Gain Control (AGC) so that it can operate in adverse conditions (line noise) thanks to its advanced powerline circuit design. This plug-in module allows X10 remote control for any 2- or 3-prong plug-in electronic device up to 500W/15A. Simply plug the appliance into the module, and plug the module into a standard power outlet. It's perfect for remotely controlling lights, radios, air conditioners, fans and other appliances. NOTE: Requires an X10 controller to operate, sold separately. The X10 Appliance Module Is An X10 Plug-In Receiver: A basic X10 system includes a Transmitter and a Receiver - both sold separately. Transmitters are control devices that send X10 signals through your home's electrical wiring to X10 Receivers. When a Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright. X10 makes it so easy to automate your home. X10 began manufacturing home automation and security products in the late 70s, establishing X10 as a smart home standard. X10 utilizes powerline technology to transmit control signals anywhere in your house over your existing electrical lines, so you can control lights and appliances throughout your home without running new wires! Have complete, automated control over lights and appliances from anywhere in your home with X10. Manufacturer Part Number: PAM06. 3 Pin Appliance Module: 120 Volts AC, 60Hz. Maximum Load: Resistive: 15 Amps, Motor: 1/3 HP, Incandescent: 500W, Television/Stereo: 400W. Minimum Load: 40W (Lamps/Loads rated below 40W may flicker and/or operate erratically). Warranty: 2 Year Limited.
Works with LED bulbs