Installing dimmers in your home can help you save on energy by turning on the lights only as brightly as needed. It used to be that with old incandescent bulbs and traditional analogue dimmers you would not save much electricity by installing a dimmer as most of the energy would be lost as heat in the dimmer itself, but with Digital MCU Smart-chip Technology the dimmer does not heat up and that energy is not lost. When using a dimmable LED, the energy used is directly proportionate to the light output of the bulb. BESTTEN Digital Dimmers use MCU (Micro Controller Unit) Smart-chip to digitally control lights. Using this technology allows us to build the most advanced dimmers to date, with many advantages above the competition. When you pull switch from the box, take a picture of the location of the wires on the old switch with phone for future reference. Take note that 2 of the terminals on the switch are the same color. The wires connected to these terminals will be connected to the 2 red wires on your new dimmer. Mark these wires with a piece of tape. The wire on the third terminal will be your line or load and will be connected to the black wire on your new dimmer. There may also be a green or bare copper wire attached to your old switch. This is the ground wire and will be connected to the green wire on your new dimmer. The ability to use these dimmers with almost any dimmable light, LED, CFL, halogen or incandescent bulbs, lamps or light panels is achieved with MCU Smart-chip technology. This is a true leap in dimmer technology and have allowed us to offer the widest range of dimmable light compatibility to date. Digital MCU Smart-chip technology means the dimming is done electronically rather than conventional analogue methods. This means the new compact design offers the same capacity of a larger dimmer but in the slimmest possible size making installation a lot easier in wall boxes where there are many wires or where space is limited where other dimmers just won’t fit. Our dimmers have an initial voltage adjustment wheel. The adjuster wheel can be rotated to set the initial voltage when the dimmer is set to the lowest level ensuring lights come on and are stable without flickering even at the lowest dimmer setting. Product Description
BESTTEN Digital Dimmers - Precise Light Control
Advanced MCU Smart-chip Digital Dimmer Technology
How to change from a standard 3-Way switch
Widest Compatibility Range
The Slimmest Dimmer
Lowest Light Adjustment wheel.
Model No. USP-DS06M-5PK USP-DS07N-6PK USP-DS08M-10PK1 USP-LS02N-5PK USP-LS02S-10PK USP-DS03-10PK Wall Plate N/A N/A N/A N/A Screwless Screwless Color White White White White White White Item Package Quantity 1/5/10 6 3/6/10 5/10 1/3/10 1/5/10
Model No. USP-LS01N-10PK USP-LS03N-10PK USP-LS04-5PK USP-LS04S-2PK USP-LS05-2PK USP-TS01-10PK Wall Plate N/A N/A Standard Screwless Standard Standard Color White White White White White White Item Package Quantity 10/30/40/100 10/30 2/5/10 1/2/10 2/4 10
USB Rating n/a n/a 4.8A 4.2A n/a n/a Receptacle Rating 15A/125V/1875W 20A/125V/2500W 15A/125V/1875W n/a 15A/125V/1875W 15A/125V/1875W Package Quantity 10/20 10/20 10 1 2 2
Item model number | USP-DS08M-10PK1 |
Current Rating | 15 Amps |
Actuator Type | Rocker |
Mounting Type Pole | Specification Met ETL |
Product Dimensions | 4.13 x 1.73 x 0.87 inches; 2.28 Pounds |
Country of Origin | China |
Connector Type | Crimp |
Operating Voltage | 120 Volts |
Terminal | Screw |
Operation Mode | Off |
Item Dimensions LxWxH | 4.13 x 1.73 x 0.87 inches |
Circuit Type | 3-way |
Contact Type | Normally Closed |
Switch Type Rocker | Material Copper |
Number of Items | 10 |
Shipping
Returns and payment
FeedBack
For any questions, using eBay contact system