ITM Moray Black NOS/NIB A-Head Stem - 120 mm 1" Classic 1990s Ahead Handlebar
✓ Original part - produced in the 1990s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping
ITM Moray ahead handlebar stem, hailing from Italy and in production during the 1990s (yet still new & unused after all this time!). Made from aluminium and weighing in at 310 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.
OVERVIEW
Production Era - 1990s
Country - Italian
Material - Aluminium
Weight - 310 g
Stock Code - D-STA4C
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Extension Length (ctc)* - 120 mm
Steerer Size (OD) - 1" (25.4 mm)
Bar Clamp Size - 25.8 mm
Stack Height - 44 mm
Angle - 75 Degrees / 80 Degrees (Adjustable)
*See help section.
SHIPPING & TAXES
We've been safely sending orders around the world since 2010. You can see the exact postage costs within ebay before you buy. Your order will be carefully packed and sent with tracking & insurance, normally within 2-3 days, but larger items and orders placed before the weekend can take an extra day or two to despatch.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
- For EU orders under 150 euros, import fees are now included in the price, so there will be nothing further to pay.
- For EU orders over 150 euros, and for all orders from outside of the EU, there may be import fees to pay directly to the delivery company before receiving the goods. Unfortunately we can’t advise on the exact costs as it varies from country to country, so please check your national rates before purchasing.
You’ll see a message from eBay confirming whether import fees have been included or not before you make a payment.
HELP SECTION
Extension Length (ctc)* - measured from the centre of the handlebar clamp to the centre of the steerer clamp, to the nearest 5 mm. This measurement is taken through the middle of the extension, not along the top or bottom.
Steerer Size (OD) - OD means outside diameter, this is the most important measurement when checking the stem fits your bike. This should match the measurement of the outside of your fork's steerer column, where the stem will be clamped.
Bar Clamp Size - this should match the outside diameter of your handlebars and should be as close as possible to ensure a good and safe fit.
Stack Height - the height of the part that clamps to the forks. This is the minimum amount of space you will need on the fork's steerer column for the stem to fit (minus a few mm as the top of the steerer tube needs to sit just below the top of the stem).
Angle - the angle of the stem's extension in relation to the the fork steerer. Bear in mind the steerer sits at the same angle as the head tube, so a 90 degree stem would not be parallel to the ground. Some manufacturers refer to this as rise or drop, in which case an 80 degree stem would drop 10 degrees from a right angle. Most a-head stems can be flipped although it does depend on the design.
