1:50 scale showman's 10 car fairground Brooklands Speedway Ride MDF model kit

NOTE! this model does not come with printed instructions or yellow/red roof covering

you can download the instructions and printable roof covering from www.lobokit.co.uk

This is an MDF laser cut model kit of a 10 Car Fairground Brooklands speedway type track

This kit is designed as a static model

The kit is supplied on laser cut MDF boards, the parts easily detach using a knife to cut the remaining holding tabs

The kit has been designed to give the look of the original with all the intricate roof and fencing woodwork

The track panels have detail etched in so there is quite a bit of laser work to produce these

Assembly instruction manual now available to download at 

lobokit.co.uk

The red/yellow roof covering and upper board decals are not supplied with this 

but I have produced a free word document with these that are printable on A4 paper 

you can print these out if you wish and use them on the model, the download link for these is at 

lobokit.co.uk

The cars are 3D printed in PLA plastic and may be a different colour than shown dependant on what is on the printer 

at the time, they are supplied with the separate lower crash frame and steering wheel and ply spacers for underneath.

These can be glued with superglue or epoxy etc

This would be a great addition to any layout and is a fantastic model when painted and your own lighting added etc

This kit is quite easy to build, there is a couple of fiddly bits but nothing major

the Kit is assembled using wood glue or similar.

you will receive the MDF kit, a download link for roof/decals, 10 x 3d printed cars with tiny separate steering wheels, 

frames and spacers.

The overall size of the top is, 590mm wide x 300mm from front to back

From floor to peak of roof is 110mm

 The base is approx. 535mm wide x 250mm from front to back

The cars are 36mm long x 22mm wide x 13mm high plus top of steering wheel