Feature:
1. The whole body is waterproof, rainwater cannot enter the inside when it rains, which greatly improves the service life of the product.
2. The arc probe is smoothly, customized according to the characteristics of the cow and mare, reducing the interference during pregnancy.
3. Waterproof switch design, the switch button is protected by a rubber sleeve, easy to use, located on the lower side of the handle.
4. The large screen automatically displays, the data is accurate, and the 3 digits display makes the numbers more intuitive.
5. Large‑capacity removable battery, hanging hole design, when the screen displays "LB", unscrew the bottom screw, you can replace the battery.
Specification:
Item Type: Cows Estrous Detector
Material: PE
Color: As Picture Shown
Probe Length: Approx. 41cm/16.1in
Weight: Approx. 787.0g/27.8oz
Purpose: Cow and mare ovulation test, detection of cow and mare estrus and mating time
Battery: Carbon Battery 6F22x1 (800mAh) (built-in)
Working Temperature: 0-50℃
How to use:
1. Please clean the probe and probe of the instrument before use. It is recommended to use household detergent, get a cotton cloth to wet, put the detergent on the cotton cloth, and then wipe the probe and probe repeatedly, especially the probe part must be sufficient Wipe, because the probe is used to measure the resistance value of the mucus during the estrus of the female animal, so we must ensure the cleanliness of the probe. Finally, rinse it with water and use it directly. Don’t wipe it dry after flushing. Water drops will not affect it. Test Results.
2. Please keep the tested female animal in a static state, do not move, tilt the instrument slightly and then insert it into the female animal’s cervix in parallel, until it can’t move.
3. After inserting it, rotate the instrument for two weeks and fix it in this position. Don’t move it, click the switch, and “--” will flash on the display, and then the data will be displayed. Click the switch again, and the second set of data will appear on the display. Then click the switch a third time, and the third set of data will appear on the display. When reading these three sets of data, do not move or change the position of the probe, do not pull it out and plug it in again, do not rotate the device every time one set of data is taken.
4. To ensure the accuracy of the data, the two sets of data that are close to each other are used as test records.
Take the cow as an example:
When the cow is not in heat, the data is above 300
After entering the estrus period, the data will drop below 300, and the lowest can drop to about 160. It lasts for a day or so, and then the data is opened, and when it rises to 250-300, it enters the ovulation period and can be bred.
As long as the cows have signs of heat, the data will definitely be below 300, and most of them will be below 250. After a few hours of monitoring, you can control the value changes and determine the best mating time.
Package List:
1 x Cows Estrous Detector
Note:
1. The insertion depth must be executed strictly according to the instructions, and the inspection depth and angle must be consistent each time.
2. In order to ensure the accuracy of the data, do not move or change the location of the device during the detection process.
3. The animal should be in a normal standing state.
4. After inserting, it must be rotated for two weeks before testing. The minimum interval between two tests is two hours.
5. Thorough cleaning should be carried out before and after the test to avoid infection and ensure the accuracy of the value.
6. Please allow 1cm/0.4in error due to manual measurement. Thanks for your understanding.
