Product features:
1. One meter for two purposes, voltage and current control at the same time
2.Current and voltage proofreading resistor
3.IC adopts original imported chip, long service life.
4. Equipped with five wires, easy access to the car, battery car, motorbike car line, used to monitor the battery voltage, timely grasp of the battery voltage status, but also can be used for other products, voltage, current measurement purposes
5. The meter head adopts common ground design, i.e. the earth wire of the measuring end and the earth wire of the power supply end are connected, so it can only be connected between the negative pole of the measured equipment and the negative pole of the power supply.
1. One meter for two purposes, voltage and current control at the same time
2.Current and voltage proofreading resistor
3.IC adopts original imported chip, long service life.
4. Equipped with five wires, easy access to the car, battery car, motorbike car line, used to monitor the battery voltage, timely grasp of the battery voltage status, but also can be used for other products, voltage, current measurement purposes
5. The meter head adopts common ground design, i.e. the earth wire of the measuring end and the earth wire of the power supply end are connected, so it can only be connected between the negative pole of the measured equipment and the negative pole of the power supply.
Product parameters:
Supply voltage: DC4.5-30V (ultra-wide range, applicable to a variety of places)
Test voltage: 0~100V; minimum resolution: 0.1V
Test current range: maximum 10A, minimum resolution: 10MA, (built-in frequency divider)
Operating current: <20MA (ultra-low power consumption)
Display mode: 0.28 "LED-monochrome (full red) monochrome (full blue) dual-colour (red and blue)
Installation aperture: 45.5*26.5mm
Measurement rate: >200mS/time
Special note: the display can be colour-coordinated according to customer requirements
Measurement accuracy: 1% (±1 word)
Supply voltage: DC4.5-30V (ultra-wide range, applicable to a variety of places)
Test voltage: 0~100V; minimum resolution: 0.1V
Test current range: maximum 10A, minimum resolution: 10MA, (built-in frequency divider)
Operating current: <20MA (ultra-low power consumption)
Display mode: 0.28 "LED-monochrome (full red) monochrome (full blue) dual-colour (red and blue)
Installation aperture: 45.5*26.5mm
Measurement rate: >200mS/time
Special note: the display can be colour-coordinated according to customer requirements
Measurement accuracy: 1% (±1 word)
Packing and list:
Voltage and current meter *1 + wire *1
Voltage and current meter *1 + wire *1
Am 07.09.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 07.11.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 23.02.2024 hat der Verkäufer die folgenden Angaben hinzugefügt: