Features:
1. Compact size, capable of displaying voltage and current on the same screen simultaneously.
2. Equipped with a splitter, there is no need to connect an external current transformer for easy testing.
3. The working current is very small, only around 15mA, ensuring safe and reliable use.
4. Using high current wiring terminals, the contact surface of the live block is large, and the connecting wires are firm and reliable.
5. Dual three digit LED digital display, easy to observe, and clear reading at a glance.

Parameter:
Voltage measurement range: DC 4.5-30V
Voltage tolerance: 1% (± 1 word)
Current measurement range: 0-30A, 0-50A (optional)
Resolution: 0.01A below 10A, 0.1A above 10A
Diverter: built-in diverter
Working current:<15mA
Refresh rate: ≥ 500mS/time
Working temperature: -10~65 ℃
Working humidity: 10~80% (without condensation)
Working pressure: 80-106kPa
Display method: dual three position 0.28-inch LED digital tube
Display color: red+red, red+blue
Product size: 48 * 29 * 31mm
Opening size: recommended 46 * 27mm

Wiring steps:
1. When wiring, handle the disconnected wires properly and avoid touching other places;
2. Connect the wire of terminal GND to the negative pole of the power supply according to the current direction, and connect the wire of terminal OUT - to the negative pole of the load, which is connected in series to the negative pole of the tested system;
3. Connect the OUT terminal wire to the positive pole of the measured system; (The voltage between the GND line and the terminal is less than 30V, it is recommended to connect around 12V);

Package include:
Voltammeter * 1