1:76 scale Showman's fairground Miami ride MDF model kit

The Laser cut MDF Miami ride

NOTE! this model does not come with printed instructions

you can view and download the pdf instructions www.lobokit.co.uk

The MDF laser cut kit is designed as a static model due to the size

There are 3d printed parts such as the counterbalance weights, bearings, gondola and fences etc included.

The parts are printed in PLA plastic and may be a different colour than shown dependant on what is on the printer 

at the time.

you will need to make your own safety restraint, using piano wire and cut pieces of insulation

This would be difficult to motorise as the parts are small

 

The model isn't too difficult to assemble see instructions.

There are holes for 2mm simulated Lights which are supplied and made from transparent red acrylic 

The kit is assembled with wood glue or similar and superglue or epoxy for non wood parts.

Dimensions of the model are

base = 159mm wide plus the paybox by 81mm high plus the letters  x 56mm front to back

The fences are 13mm high , each letter is 10mm high

The 16 seat gondola is 125mm wide

A couple of different words are supplied so you can use your choice