3.5" 2.5" Dual Hard Drivers SATA Hard Drive Offline-Clone Docking Station
Feature:
- SATA Drives Only
This docking station do not compatible with IDE drives. It is compatible with all 2.5 inch and 3.5 inch SATA HDD and SSD.
- Offline clone
The offline cloning feature allows data to be backed up without the use of a separate computer.
- Smart Auto-sleep Mode
The docking station enters sleep mode after 15 minutes of inactivity, greatly reducing ineffective power consumption and extending the life of the hard disk, protecting your hard disk data for you.
- Fast Transfer
US8 3.0 to SATA3.0 dual high-speed, UASP acceleration protocol supported. The measured tramsmission speed can reach 420MB/s.
- Considerate Design
Four anti-skid footpads on the bottom of the product provide maximum protection for your device from sudden sliding off and insure the stability.
- Stable Power Supply
Equipped with 12V/3A 3000mA power adapter to meet the power consumption requirements of large-capacity hard drives. Please connect the power adapter when using.
Specification：
- Color: Satin Grey
- Form Factor: 2.5" and 3.5" inch
- Capacity: Supports Max. 2x18TB
- Support Interface: SATA I, SATA II,SATA III, USB 3.0
- Tramsmission speed: 420MB/s
- Compatibility system: Windows, Mac OS, Linux
- Power Supply: 12V, 3A, 3000mA AC
Instructions for cloning：
- First, insert the hard disk, connect the power supply, and then press the power button (offline cloning, no need to connect to the computer). At this time, the power and corresponding disk indicator lights are on.
- Next, press and hold the Copy button for 3 seconds, and the 25%, 50%, 75%, and 100% LEDs will blink in a cycle.
- Finally, press the Copy button again and the hard disk dock will automatically copy the data from disk A (original disk) to disk B (target disk).
Note: Clone mode will only copy from A (original disk) to B (target disk) in sequence, not in reverse. Clone mode will automatically empty all data on the destination disk. The capacity of the target disk must be greater than or equal to the capacity of the original disk.
WARM TIP: If in doubt, ask our customer service for help or request an electronic manual.
Package included :
- 1x Dual Docking Station
- 1x EU Power Supply
- 1x UK AC Plug Adapter
- 1x USB 3.0 cable
2.5"/3.5" SATA Hard Drive Disk Enclosure Case
Features:
- Support any 2.5"/ 3.5" SATA HDD / SSD (up to 18TB capacity), plug and play, driver free, hot swappable and pluggable.
- Compliant with UASP protocol, improving transfer rate, time saving and efficient. UASP increases read speed by 70% compared with traditional USB 3.0 at peak performance.
- Blazing fast USB 3.0 transfer rates up to 5Gbps, backward compatible with USB 2.0 480Mbps and USB 1.1. Support SATA III transfer rates up to 6 Gbps, SATA II 3 Gbps and SATA I 1.5 Gbps.
- Works greatly for Windows 10 / 8 / 7 / Vista / XP, for Mac OS X, and for Linux OS. Wide application, can be applied to PC, laptop, HD player, for PS4, smart TV, router and more.
- Independent 12V / 2A power adapter lengthens continuous power supply hours, security and stability.
- Fixed mounting screws facilitate reliable safe hard drive installation, resolving a solution of external enclosure's easiness damage to hard disk interface.
Specification:
- Color: Black
- Material: Environmental ABS
- UASP protocol: Support
- Transfer speed: USB 3.0 5Gbps,SATA 3.0 6Gbps
- External interface: USB 3.1 Type C
- Internal interface: SATA I/II/III
- Data Cable: USB Type-A/M to USB Type-C/M
- Fits drive size: All 2.5inch/ 3.5inch SATA HDD / SSD
- Support drive capacity: Up to 18TB ( The HDD/SSD is not included)
- Operating system: for Win XP/ Vista, for Win7/ 8/ 10, for Mac OS and for Linux
- Clip: JMS580
- Power supply: DC 12V / 2A
- Input voltage: AC 100~240V 50~60Hz
- USB cable length: 100cm
- Plug: EU Plug+Adapter
- Dimensions: 115*187*34mm
Package list:
- 1 * 2.5" / 3.5" HDD SSD Enclosure Case
- 1 * 12V/2A EU Power Supply
- 1 * UK Plug Adapter
- 1 * USB 3.1 Data Cable
