Features:
brand new high quality
Made of high quality material,
This digital oscilloscope has similar bandwidth to the DSO138, but has significant improvements in structure, mechanism and operation
It has high sensitivity, lightweight and portable size, 2.4 inch TFT screen and protective case
Waveform parameters such as frequency, period, pulse width, duty cycle, maximum value/minimum value/average value/peak value/peak value/imaginary value can be displayed
Uses an AR M Cortex-M3 processor (STM32F103C8) and includes a 2.4" color TFT display
For example, secondary development can be carried out on the basis of this kit, and it can be changed into a millivolt meter and a data logger.
Comes with instructions for easy installation and operation
Auto/Normal/Single trigger mode, easy to capture torque waveform
Available rising or falling edge trigger
The previous waveform that can be observed before triggering (negative delay)
Waveform display can be at any time (hold function)
Digital display of waveform parameters, including frequency, period, pulse width, duty cycle, maximum/minimum/average/peak-to-peak value/imaginary value
Waveform storage function: the waveform will not be lost after power off
Short and open detection: can help users find soldering errors
TFT controller identification function
SMD has been soldered, more suitable for electronic beginners

Product parameters:
Type: finished product
Plug: US/EU (optional)
Number of channels: 1
Analog bandwidth: 0-200KHz
Sensitivity range: 5mV/Div-20V/Div
Sensitivity error: <5%
Maximum input voltage: 50Vpk (1X probe)
Input impedance: 1M ohm/20pF
Resolution: 12 bit
Record length: 1024 points
Coupling method: DC/AC/GND
Maximum real-time sampling rate: 1MSa/s
Time base range: 10us/Div-500s/Div
Trigger mode: automatic, normal, single
Trigger type: rising edge/falling edge
Trigger position: buffer center
Display: 2.4 inches color TFT LCD, resolution 320*240
Power supply voltage: DC 9V (8-10V acceptable)
Current Consumption: ~120mA @ 9V
Product size: 115 * 75 * 22mm / 4.53 * 2.95 * 0.87 inches

Package Included:
1 * oscilloscope
1 * BNC clip cable
1 * Probe
1 * Power Adapter
1 * User Manual

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.