Quantity |
2 Spacers for 2 Wheels |
Torque Specs |
140NM / 113NM |
Vehicle Bolt Pattern |
5x120 MM |
Hub Centric | Yes |
Wheel Bolt Pattern |
5x120 MM |
Material |
Forged 6061-T6 Aluminum |
Thickness |
3MM / 0.12" inch |
Minimum Number of turns for Bolts/Nuts |
7.5 Turns / 6.5 Turns |
Center Bore |
72.56 MM |
Fit Models |
BMW Most Models |
Thread Pitch |
Without Bolts |
Color Choice |
Black Anodized |
Bolt Grade |
Without Bolts |
Brand |
BLOXSPORT |
Please check the following compatible models for this item:
1 Series F20 F21 E87 E81 E82 E88 128i 135i
2 Series F22 228i
3 Series F30 F31 F34 320i 328i 335i M3 E36 E46 E90 E91 E92 E93
4 Series F32 F33 428i 435i
5 Series F10 F11 F07 M5 F10 E60 E61 E34 E28
6 Series F12 640i 650i M6 F06 F12 F13 E63 E64 E24 645Ci 645Ci 650i
7 Series F01 F02 E65 E66 740I 740Li 750i 750Li 760i 760Li E38 E32 E23 730I 730Li
X1 E84 X3 F25 X3 E83
X5 E53 X5M E70 F15 Rear
X6 X6M E71 F16 Rear
Z3 E36 Z4 E89 E86 E85 Z8 E52
>> Hub Centric Design--NO VIBRATION
However, with a non-hubcentric wheel spacer, the weight of the car is no longer on the locating ring and is now on the studs, it more easily cause vibrations from the wheels, and studs bear all weight of the car. That doesn't mean you can't choose non-hubcentric wheel spacer, but just confirm the studs are in good quality.
5 years warranty -- Forged Aluminum 6061-T6
As the picture show you, The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety. BLOXSPORT insist on using the forged material, insist on the conception of putting safety in the first place and reject to use the casting material.
Forged parts had a 26% higher tensile strength than the cast parts. This means you can have stronger shackles at a lower part weight.
Forged parts have a 37% higher fatigue strength resulting in a factor of six longer fatigue life. This means that a forged shackle is going to last longer.
>> Modern CNC Machined + Hard Anodized Surface + Professional Measurement
The
wheel spacers were modern CNC machined, the surface was more
smooth, increasing car driving more stable and more secure and no
vibration. 0.02mm Machining precision, the consummate data comes
from constant practice, BLOXSPORT always make perfection more
perfect.
How Thick Should your car fit?
Before you buy, please confirm that this is the thickness you
need. If you not sure which thickness you can install for your car,
please use the measuring device to measure from the inside of the
straight edge to the inner fender lip as below showing.
Item Benefits:
Product effect:
>> Factory Shows
BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.).
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).