WASD Arcade Controller Fight Stick Game Controller for Hitbox Mixbox Fighting Game
Features:-
The large round button can be used to switch between double jump and
other button functions. For example, you can set it to L3, so that you
can set up functions such as throwing, defending, bursting, etc. in the
game.
- Red low profile switches by GATERON and pluggable ABS
injection molded keycaps are used. It is smooth to use. The dynamics are
moderate and the sound is low.
- Size of the gaming controller: About 25 x 14 x 1.5cm/9.8 x 5.5 x 0.6" (LxWxH).
- The panel screws are recessed and edge rounding
- The buttons are only about 3mm/0.1" above the panel.
- With USB type-c port
- The bottom with RGB strip. Multiple light modes are supported
- Multi-layer acrylic stacked structure
- The bottom is a whole rubber non-slip mat
Package Included:- 1 x Game Controller
Packaging Details:- G.W.: 0.8kg
Note:
- USB cable is not included in the package.
- Panel sticker pictured is not included, for demonstration purposes only. Thank you for your understanding!![](https://www.thanksbuyer.com/image/catalog/87896/88026-01.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-02.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-03.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-05.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-06.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-07.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-08.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-09.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-10.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-11.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-12.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-13.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-14.jpg)
![](https://www.thanksbuyer.com/image/catalog/87896/88026-15.jpg)
How to Use:
1. Connect to Different Game Consoles:
Computer
host: Press and hold the button B on the game controller, then connect a
data cable to the computer, and release the button B. When you use your
computer for the first time, drivers will be automatically installed.
Then in Devices & Printers, you'll see a controller for Xbox360,
where you can test the keys. For PS4: Press and hold the button Y on the
game controller, then plug the data cable into the console for PS4 and
release the button Y. Then press the button PS on the game controller,
and the game controller can be used normally.
The following corresponding buttons correspond to different game consoles:
A = Switch, B=Xinput (for PC Xbox360) , RT=Keyboard (PC keyboard), X=for PS3, Y=for PS4
(Note: The device has a memory function. The next time you connect it to the same game console, you don't need to switch. )
2. Last Input Priority:
In the process of use, players can directly switch to the Last Input Priority mode at any time.
Press Guide + Start + Down at the same time, and it will be standing (default mode).
Press Guide + Start + Up at the same time, and it will be up (jump) priority mode.
Press
Guide + Start + Left at the same time, this is the last input priority
mode. (Press and hold "up (jump)" and then "down (crouch)". These two
buttons are not released at the same time, and this is the state of down
(crouch) because down (crouch) is the rear input. And the left and
right directions are the same.) Note: The last input priority mode has a
memory function. Thus, it only needs to be set once, and does not need
to be reset before each use.
3. Switching of controller left & right stick and DP modes:
These three modes can be switched at will when it is used.
D-Pad mode (default): Press Back + Start + Down at the same time.
Left stick: Press Back + Start + Left at the same time.
Right stick: Press Back + Start + Right at the same time.
For
example, if you use an emulator for WinKawaks to play arcade games.
Then you need to switch the mode to the left stick mode for the emulator
to recognize the direction.
4. Change bottom RGB lighting effect:
Press Back + Start + X/□ at the same time to switch between different lighting effects.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2.
For remote regions of DHL/FedEx..., extra shipping costs might be
charged. Usually it costs about 30USD-50USD. We will contact you if
shipping company informed us your address belongs to remote area. Thanks
for your understanding.
Return Terms
If
you receive the item that not satisfied or defective, please do not
open case and kindly notify us within 30 days. We will guide you the
returning process for replacement or refund.
Custom Duties & Taxes
1.
It is buyer's responsibility to cover the import duties, taxes.We do
not charge any taxes and fees, and the possible taxes and fees will be
collected by the platform or by third parties such as customs and
carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1.
Please kindly leave us a positive feedback and 5 star DSR if you
satisfied with our product and service. Please feel free to contact us
firstly if you have any problem with your order, we are responsible and
credible seller and will solve the issue it for you asap.
2. If you
are dissatisfied for any reason, please don't be quick to leave us
neutral or negative feedback. We work hard to make sure EVERY CUSTOMER
100% SATISFIED and resolve any problem for you and always leave positive
feedback to all our customers.