eBay

True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 325 also offers DC current and frequency measurements.

Measurement capability

400 A ac and dc current measurement
600 V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement up to 40 kΩ with continuity detection
Temperature and capacitance measurement
Frequency measurement

Features

Slim, ergonomic design
Large, easy to read backlight display
CAT IV 300V/CAT III 600 V safety rating
Hold button
Two-year warranty
Soft carrying case

Specifications
		323	324	325
AC current	Range	400.0 A	40.00 A/400.0 A	40.00 A/400.0 A
AC current	Accuracy	2 % ± 5 digits (45 Hz to 65 Hz) 2.5 % ± 5 digits (65 Hz to 400 Hz)	1.5 % ± 5 digits (45 Hz to 400 Hz) Note: Add 2 % for position sensitivity	2 % ± 5 digits (45 Hz to 65 Hz) 2.5 % ± 5 digits (65 Hz to 400 Hz)
DC current	Range	–	–	40.00 A/400.0 A
DC current	Accuracy	–	–	2 % ± 5 digits
AC voltage	Range	600.0 V	600.0 V	600.0 V
AC voltage	Accuracy	1.5 % ± 5 digits	1.5 % ± 5 digits	1.5 % ± 5 digits
DC voltage	Range	600.0 V	600.0 V	600.0 V
DC voltage	Accuracy	1.0 % ± 5 digits	1.0 % ± 5 digits	1.0 % ± 5 digits
Resistance	Range	400.0 Ω/ 4000 Ω	400.0 Ω/ 4000 Ω	400.0 Ω/ 4000 Ω/ 40.00 kΩ
Resistance	Accuracy	1.0 % ± 5 digits	1.0 % ± 5 digits	1.0 % ± 5 digits
Continuity		≤ 70 Ω	≤ 30 Ω	≤ 30 Ω
Capacitance		–	100.0 μF to 1000 μF	100.0 μF to 1000 μF
Frequency		–	–	5.0 Hz to 500.0 Hz
AC response		True-rms	True-rms	True-rms
Backlight		–	Yes	Yes
Data hold		Yes	Yes	Yes
Contact temperature		–	-10.0 °C to 400.0 °C (14.0 °F to 752.0 °F)	-10.0 °C to 400.0 °C (14.0 °F to 752.0 °F)
Min/Max		–	–	Yes
Size	H x W x D (mm)	207 x 75 x 34	207 x 75 x 34	207 x 75 x 34
	Max wire diameter	30 mm (600 MCM)	30 mm (600 MCM)	30 mm (600 MCM)
	Weight	265 g	208 g	283 g
Category rating		CAT III 600 V CAT IV 300 V	CAT III 600 V CAT IV 300 V	CAT III 600 V CAT IV 300 V
Warranty		Two-year	Two-year	Two-year

Fluke 325 Clampmeter is supplied with the following

Test leads
Soft case
User’s manual
Free personalised calibration certificate (calibrated before shipping. Certificate made out to the buyer)