Solar Lights PIR Security Motion Sensor Pendant Light Outdoor Garden Lamp IP68
Introduction:
1.The light is powered by solar energy, which is versatile  and eco-friendly.
 
2.Adopted multi-angle rotation design, solar panel and  light arms are adjustable.
 
3.The light comes with a convenient remote control so that   you can control it from the distant.
 
4.The 16.5ft solar panel cable is long enough to reach high points for maximum sun exposure and charging, providing a more flexible and user-friendly operation.
 
5.This solar light is suitable for your front-door,garage,garden, barn, shed, yard, patio, platform, park, porch,  step, fence, driveways, coop, farmhouse and etc.
Function Setting

Function description

[On/Off light mode] Press the "ON/OFF" power switch to turn on the light, (default mode 1 after self-inspection) and then press to turn off the light.

[Mode conversion button] The light flashes and switches to the next mode every time you press the "MODE" button

Mode 1: The pedestrian light is on, and the pedestrian light is slightly on, with a delay of 15 seconds.

Mode 2: The pedestrian light is on and the pedestrian light is off, delaying 15 seconds.

Mode 3: The light is always on at 25% brightness.

Mode 4: The light for people coming in and going out all day, with a delay of 15 seconds (the light is also on during the day, without light control)

[AUTO mode] is always on all day. When the power remains 50%, turn to mode 4, and cycle the next day (no light control)

The time delay of 25S mode 1, mode 2 and mode 4 induction lighting is 25 seconds.

The time delay of 35S mode 1, mode 2 and mode 4 induction lighting is 35 seconds.

The duration of 45S delay mode 1, mode 2 and mode 4 induction lighting is 45 seconds.

[Brightness adjustment] Press the "-+" key to adjust the light brightness, which is divided into five levels. (Various modes are applicable)

[Light control] Automatically detect the ambient light, automatically turn off the light and charge it during the day, and automatically turn on the light at night.

[Indicator light] When the red light flashes, the solar panel is charging (in the daytime or in a bright light environment). At this time, mode 1, 2 and 3 do not light up, and mode 4 and AUTO can light up.

Installation Steps:
1.Install the solar panel Please Install the solar panel where it can get direct sunlight.punch
2. suitable holes in the desired location. insert the expansion pillar-hinges. then install the bracket and tighten the screws. you can adjust the  angle of the solar panel for optimum sun exposure and to increase the conversion of solar energy.
3.Connect the cable Connect the wires to the solar panel solar light. Tighten the nuts.Made in China Drill 2 suitable holes where you want to install,insert the expansion pillar-hinges. Fix the fixed base to the wall by screws. Connect the bracket and solar light with screws and fix it on the fixed base.you can adjust the up and down angle of the bracket and light.Induction lighting delay time setting(Applicable to mode1, mode2 and mode4) The ideal installation height for solar lights is 8-13 feet.
SOLAR MOTION SENSOR LIGHT
 
Specification:
- Solar Panel: 6.5V/3.5W
- Lithium battery: 3.7V/4400mA
- Output: 10W
- LED:SMD2835/6000K-6500K*108PCS
- Luminous flux: 1500 lumen
- Induction distance: 1-5M
- Remote distance: 1-5M
- Charging time: 6-8hours
- Wire length: 5M
- Waterproof level: IP65
 

Packing details:

1) Solar wall lamp * 1PCS

2) Solar panel * 1PCS

3) Bracket * 1PCS

4) Fixed seat * 1PCS

5) PM5 * 30 screw * 2PCS

6) M5 nut * 2PCS

7) Packing box * 1PCS

8) Bubble bag * 2PCS

9) Instructions * 1PCS

10) KA5 * 40 screw * 2PCS

11) D8MM rubber particles * 2PCS

12) KA4 * 30 screw * 2PCS

13) D6MM rubber particles * 2PCS

14) Remote control * 1PCS

15) AAA battery * 2PCS

 
PushAuction


On Mar 18, 2024 at 04:37:22 PDT, seller added the following information:

DataCaciques