New and Improved, Works great on Halftone image.

No ink residue left on the film after transferred.

See result comparison photo of Glossy Film vs Matt Film

Digital Transfer Film for Garment Printing

A3 Width size.100m length

Use with Pigment Ink DTF Printer and Hot Melt Powder(polyamide).

 

  

Print the image mirrored using DTF or DTG printer with pigment inks (not textile inks), color first then white under base on top.

Apply hot melt powder on printed area while ink is still wet, shake off any excess powder from non printed area.

Bake or heat up the sheet to melt the powder so it can bond to the ink. (until crystallization is disappeared)

Heat press may be used, hover the platen over the sheet about 1/2-1" above for 3 minutes at 350F.

For convectional oven, set temperature 250-260 and bake for 60 sec to 90 sec.

Garment Transfer: heat up the press - 315-330 F - Medium/Heavy Pressure 15 seconds - Cold Peel (diagonal direction roll peel)

Repress 5 seconds with Parchment Paper on top

Works on cotton, cotton/poly, and polyester too. (not tested on nylon, leather or elastic compressed polyester)

Use black powder for black garment for best result.