For Arduino Compatible 2WD Smart Car Tracking Robot Kit (70 characters)
DESCRIPTION


Item Details:

  

* brand new and high quality

*Made of high quality material,  and practical to use

*Name: Tracking robot car

*The line based on photoresistor (LDR) is as follows

*Individual wheel control

*Chipset: LM393

*Material: Electrical components

*Color: As pictures show

*Board size: 10.4 * 7.2 cm(Approx.)

 

Assembly Steps:

 

*Step 1: Welding circuit

The welding part is relatively simple, the welding order is based on the principle of the component level from low to high, the first welding eight-level resistance, it is important to use the multimeter to determine whether the resistance is correct.

*Step 2: Mechanical Assembly

The red line is connected to the 3V positive power supply, the yellow line is grounded, and the excess line can be used for the motor line.

*Step 3: Install the optoelectronic circuit

The photoresistor and LED (note the polarity) are mounted on the PCB in reverse, the ground distance is about 5 mm, and the distance between the photoresistor and the LED is 5 mm. Finally, you can perform the power test.

*Step 4: Vehicle commissioning

The correct direction is along the direction of the universal wheel. If you press the light resistor on the left side, you should rotate the wheel on the right side of the car. Press and hold the light resistor on the right side, the wheel on the left side of the car should rotate, if the car comes back, It is also possible to replace the wiring of the two motors, if side is normal and the other side is rearward, because you can exchange the wiring on the back side.


Package Contents:

 

1*Bottom Plate

2*35 mm Wheels

2*Rubber Wheels

1*AA Battery Holder

2*Intelligent DC Motors

1*Screw Set

1*LM393 Chipset

1*8pin DIP Socket

10*Resistors

2*Electrolytic Capacitors

2*Photoresistors

2*Transitors

2*White LEDs

2*Red LEDs

1*Power Switch

4*70mm Wires

 

Note: 

 

1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2.Please allow slight manual measurement deviation for the data.

POLICES

 

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 



We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.


 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.




On 01-May-2024 at 18:56:55 BST, seller added the following information:

DataCaciques