Features:
* Brand new and high quality
* Made of high quality materials,
* SDR transceiver radio software defined specifically for Gigabit Ethernet Micro SD cards
* is a software-defined radio platform that supports 2TX and 2RX, supports Gigabit Ethernet and Micro SD card. It refers to the design of the famous ADI ADALM-PLUTO and improves its shortcomings.

Specification:
ADC/DAC: AD9363 (can be cracked to AD9361 or AD9364)
2 transmit channels, 2 receive channels
Radio frequency range: 70MHZ~6GHZ
Reference clock: VCTCXO 40MHZ 0.5ppm
SOC: For Zynq7010 FPGA: 28k
Memory: 512M
Flash memory: 32M
USB: 2.0, support OTG
Ethernet: 1000Mb
Micro SD can be used to boot
DC input: 5V±0.5V-2A microUSB

interface:
Note that all IO levels are 1.8V.
3.1 When using ADI-PlutoSDR official firmware, please connect URST-MI052.
3.2 When using firmware, you need to support Ethernet, please connect URST-MIO46
3.3 When booting with SD card, please connect SD-H to 1V8
3.4 When using JTAG debugging, please connect JTAG# to ground
3.5 When using external reference clock input, please connect EXCLK to GND

PTT key port:
PTT drives the optocoupler through GPIO0 (MI00) and requires an external relay or control circuit.

DFU key:
At any time, you can press the DFU button and power up the again to enter DFU mode, but you will need to connect the URST jumper to MI052.

Refer to CLK input IPEX:
You can input an external high-precision reference clock to the AD9363 through the IPEX interface connection cable.
The main level should not exceed 3.3V. You need to connect the EXCLK jumper to GND to turn off the built-in clock.

Calibrate the frequency of the built-in VCTCXO:
The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided you have a reference signal source.

Micro SD:
To support SD card booting, you need to connect the SD-H jumper to 1V8.

notes:
It comes fully assembled and ready to use.
SD card is not included in the package.

Package Included:
1 x SDR Radio

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.