Huepar 12 Lines 3D Cross Line Laser Level Kit Osram Self-Leveling Green Beam 360° Vertical Horizontal With Laser Receiver Tripod
![](https://ae01.alicdn.com/kf/Sa59cc90ae133427fb210e61f482d65b08.jpg)
![](https://ae01.alicdn.com/kf/Hb92155cc98864b5cae203cb639c48c63A.jpg)
![](https://ae01.alicdn.com/kf/S77b2107c5c5e4c81a628e19544f5cda3p.jpg)
Notes: The receiver is only suitable for our Huepar laser level, if you want, please send the message to us to confirm if this is suitable for your laser level.
![](https://ae01.alicdn.com/kf/H37b1b67e0c1c4500a2d8000566a34cad1.jpg)
![](https://ae01.alicdn.com/kf/Se5965a387c4d4324a3179865123876e54.jpg)
![](https://ae01.alicdn.com/kf/Sf79b6e5d5d0e4d9da50fc3f164fed00dA.jpg)
The laser tool can help you easier on Home Decoration, Partition Wall Construction,
Chandelier Installation, Alignment of Drilling Positions, Stair Handrail Installation, Pictures Hanging Design, Laying out Tile,
Windows Construction etc.
![](https://ae01.alicdn.com/kf/HTB1PHu5zeSSBuNjy0Flq6zBpVXaG.jpg)
GF360G 3 x 360 Green Laser Level Specifications:
Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
Laser Wavelength: 505-520nm
Leveling Accuracy: ±1/9 inch at 33Ft
Horizontal/Vertical Accuracy: ±1/9 inch at 33Ft.
Leveling/Compensation Range: ±4°
Working Distance: 130Ft (100 LUX)
Operating Time: 6 hours with all laser beams on
Power Source: Li-ion battery
IP Rating: IP54
Operation Temperature Range: 14℉ ~ 122℉ (-10℃~ 50℃)
Mount Size: 1/4"-20 and 5/8"-1
WARNING:
Avoid direct exposure of the laser beam to the eyes.
LR-5RG-GN Laser Receiver Specifications:
Pulse duration: 50 μsPWM: 5:5
Frequency: 10KHz (Matched PWM and frequency, Line lasers can work with LR-5RG Laser Receiver)
Display: Dual LCD Display
Leveling Accuracy (High): ≤2mm(1/13in)
Leveling Accuracy (Low): ≤3mm(1/9in)
Working Distance: 130ft~200ft (typical) depend on light source
Operating Time: 20 hours;
Auto Power Off (with No Signal Detected): 10min
Power Source: 2*AA Batteries (Alkaline)
Dimension (LxWxH): 140mm×68mm×26mm;
Weight: 140g
Package Included:
SET-1:
GF360CG Laser level + Battery + Charger + Bracket + Green Target + Cloth Bag + Manual
SET-2:
GF360CG Laser level + AT2 Bracket+ Battery + Charger + Bracket + Green Target + Cloth Bag + Manual
SET-3:
GF360CG Laser level + PV10 Bracket + Battery + Charger + Bracket + Green Target + Cloth Bag + Manual
SET-4:
GF360CG Laser level + Laser Receiver + Battery + Charger + Bracket + Green Target + Cloth Bag + Manual
SET-5:
GF360CG Laser level +1.4m Tripod + Battery + Charger + Bracket + Green Target + Cloth Bag + Manual
SET-6:
GF360CG Laser level +Laser Receiver+AT2 Bracket+1.4m Tripod + Green Glasses +Battery + Charger + Bracket + Green Target + Cloth Bag + Manual
SET-7:
GF360CG Laser level +Laser Receiver+PV10 Bracket+1.4m Tripod + Green Glasses +Battery + Charger + Bracket + Green Target + Cloth Bag + Manual
GF360G 3 x 360 Green Laser Level Features:
3 x 360° Multiple Line Switching Functions
This laser level projects three green beam laser lines in 360° laser planes – one horizontal and two vertical, so that users can accurately and quickly execute level, align, square and plumb applications
Users can employ the three independent 360° planes independently or together with the press of a button
Self-leveling Mode & Manual Mode
Self-leveling Mode: When the laser tool is switched to the unlocked position, the self-leveling mode is enabled.The laser beam will flash when the tool is beyond self-leveling range 4° ± 1°
Manual Mode:When the pendulum locked, the laser tool can be placed for alignment at any angle.The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.
Pulse Mode
Turn ON the pulse mode:After power ON, short press the independent button "P" on the keypad to turn on the pulse mode.Pulse mode extends the working range up to 200Ft. in brighter working conditions when using with Huepar Line Laser Detector (ASIN: B07L6FP48S).When the pulse mode is activated,the laser beams will become dimmer.It is compatible with Huepar LR-6RG / LR-5RG Line Laser Detector only. Keep the pulse mode on when using with a receiver.
Dual Power Method
The level tool can be used at job site by plugged in directly even if take out the battery.Users can charge the battery independently with the battery charger.With USB charging port, the laser level can also be charged by phone, laptop, power bank, car charger, etc.This laser level adopts rechargeable large capacity Li-ion battery.
Multiple Ways of Positioning
This laser level comes with 180°Magnetic L Mount with tripod thread of 5/8-11-Inch and 1/4-20-Inch that has strong magnets to attach to steel studs, useful for turning it around at 180 degree horizontally and being fixed on tripod.
Two Mount Sizes:1/4"-20 and 5/8"-11 mounting threads for temporarily fastening in place or being fixed on tripod.
Easy to Use
Green Target Plate increases the visibility of the laser beam.Over-molded laser window with stands hazardous job site conditions and can be removed and replaced with a screwdriver. IP54 water/dust resistance ensures you work well in hazardous working conditions.
【HUEPAR DEDICATED RECEIVER】:Huepar LR-5RG receiver can ONLY use with Huepar Line Laser Level. Please note can NOT be used for Rotary Laser Level. Recommended for use in accompanied with Huepar 901CG/902CG, BOX-1G/R, 8211G, 621CG/R, 622CG/R, 602CG/R, 603CG/R, GF360G/R Laser Level. Can also use with Tack life SC-L03 / SC-L04 Laser Level.
【AVAILABLE FOR RED AND GREEN PULSE LASER】:Turn on the Pulse Mode of the Laser Level, then Huepar LR-5RG laser receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 200 feet.
【Large Reception Window & Dual LCD Display】:Large reception window of 2 inches and optical and acoustic signals help to locate the laser plane quickly and accurately. Dual LCD displays for easy visual readout on both sides of the receiver. LCD back light provides a clear look even in low light conditions. Adjust the height until the horizontal datum line and the arrow disappear on the LCD display.
【PRECISE OPTICAL AND ACOUSTIC SIGNALS】:This laser receiver features a user-friendly interface and is smart in its simple design. Optical and acoustic signals help to locate the laser plane quickly and accurately. The LED indicator provides a clear and accurate signal. Beep sounds will remind you when you find the target.
【LONG BATTERY LIFE AND CLAMP HOLDER】:The receiver comes with 2 x AA battery, providing you with about 20 working hours. There is also an automatic shut-off feature that power down the device after about 10 minutes of being idle to extend battery life. The attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point.