UV-DTF Permanent Adhesive Decal Application Instructions

UV DECALS ARE PERMANENT  – PLEASE BE VERY CAREFUL WITH PLACEMENT!

UV-DTF Adhesive Decal Application Instructions

They can be applied to the following: glass, metal, plastic, ceramics, wood, leather, paper, cardboard.

Clean the surface you intend to apply your decal.

For non-porous surfaces, you can use alcohol, or window cleaner with a lint free rag.

Cut your decal into a manageable size. Trim off any excess and cut as close to the overall printed design as possible (keeping the general shape of the wrap/decal).

Make sure the transfer print is secure to the top film by laying it on a flat surface and rub with firm pressure using a squeegee tool, credit card or your fingertip.

Remove your decal backing: Place face down peel straight back or gently roll the backing paper away from the film and image.

Apply the decal: Position decal onto the surface, rub with firm pressure using your squeegee tool or fingertip to remove any air pockets/bubbles then peel straight back or roll transfer film to reveal finished decal.

Handwashing is recommended.

Decals cannot be repositioned and are permanent

The white background is just the backing of the sticker

Size of sticker is 150mm x130mm