1x Openlog Serieller Datenlogger Open Source Recorder Blackbox MicroSD ATmega328

Beschreibung:
Der OpenLog ist ein Open-Source-Datenlogger, der über eine einfache serielle Verbindung arbeitet und Micro-SD-Karten mit bis zu 64 GB unterstützt. Der OpenLog kann große Mengen serieller Daten speichern oder "protokollieren" und als eine Art Blackbox fungieren, um alle seriellen Daten, die Ihr Projekt generiert, zu wissenschaftlichen oder Debuggingzwecken zu speichern.
Der OpenLog läuft über einen onboard ATmega328, der dank des eingebauten Quarzes mit 16MHz läuft. OpenLog zieht 6mA, wenn ein 512 Byte Puffer aufgezeichnet wird, aber da dieser Vorgang einen Bruchteil einer Sekunde dauert, liegt die durchschnittliche Stromaufnahme näher bei 5mA. Denken Sie jedoch daran, dass Sie, wenn Sie einen konstanten Datenstrom bei 115200 Bit / s aufzeichnen, sich diesem 6-mA-Limit nähern. Alle Daten, die von OpenLog protokolliert werden, werden auf der microSD-Karte gespeichert, die Funktionen von 64 MB bis 64 GB Kapazität und FAT16 oder FAT32 Dateityp umfassen.

Spezifikationen:
VCC-Eingang: 3.3V-12V (empfohlen 3.3V-5V)
Loggen Sie sich zu günstigen Micro-SD-FAT16 / 32-Karten mit bis zu 64 GB ein
Einfache Befehlsschnittstelle
Konfigurierbare Baudraten (bis zu 115200 Bit / s)
Vorprogrammierter ATmega328 und Bootloader
Vier SPI Pogo Pins

Hinweis:
Die neueste Version der Firmware (in dieser Karte enthalten) wird nicht in Arduino 1.6.7 kompiliert. Sie müssen in 1.6.5 kompilieren.
Zwei LEDs zeigen den Schreibstatus an
2mA Leerlauf, 6mA bei maximaler Aufzeichnungsrate

Lieferinhalt: 1pcs Openlog Serial Data Logger Open Source Datenrekorder ATmega328 Support Micro SD

English description:
Description:
The OpenLog is an open source data logger that works over a simple serial connection and supports micro SD cards up to 64GB. The OpenLog can store or "log" huge amounts of serial data and act as a black box of sorts to store all the serial data that your project generates, for scientific or debugging purposes.
The OpenLog runs off of an onboard ATmega328, running at 16MHz thanks to the onboard crystal.The OpenLog draws 6mA when recording a 512 byte buffer, but as that process takes a fraction of a second, the average current draw is closer to 5mA. Keep in mind though that if you are recording a constant data stream at 115200bps, you will approach that 6mA limit. All data logged by the OpenLog is stored on the microSD card that involve the features of 64MB to 64GB capacity and FAT16 or FAT32 file type.

Specifications:
VCC Input: 3.3V-12V (Recommended 3.3V-5V)
Log to low-cost micro SD FAT16/32 cards up to 64GB
Simple command interface
Configurable baud rates (up to 115200bps)
Preprogrammed ATmega328 and bootloader
Four SPI pogo pins

Note: 
The latest version of the firmware (included with this board) does not compile in Arduino 1.6.7. You will need to compile in 1.6.5.
Two LEDs indicate writing status
2mA idle, 6mA at maximum recording rate

Package included：1pcs Openlog Serial Data Logger Open Source Data Recorder ATmega328 Support Micro SD

1. All our stock is located in China and all shipments will originate here. Your purchase will be shipped via standard airmail as soon as possible after payment clears except those custom products.
2. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
3. Shipping to USA is via Speedpak or EMS or UPS or Fedex. Other shipments will be shipped from china by Speedpak or EMS or DHL or Fedex. A tracking No. is provided once the item is dispatched. Delivery normally takes 7-20 business days if it can go smoothly through customs. 
4. We do not ship on holidays or weekends
5. You need to contact your local post office or customs department in the following cases:
Delivery mistake by the post office man
Delayed shipping due to customs detention
Delivery failure caused by wrong address

We only accept PayPal payment.

1. If you receive any damaged or defective items, we will exchange it as quickly as possible.
2. You must contact us within 7 days of delivery of the product to notify us of any defects.
3. You need to send a picture to prove the problems by using ebay's attaching files button
4. Items must be in original box and kept in good condition.
5. Buyer is responsible for return shipping cost if there isn't any problem with the product. No matter the item is free shipping or not, we pay money for the  shipping.You need to cover the actual shipping cost provided by us.

1.Do not hesitate to contact us anytime before and after your purchase, we are committed to your 100% customer satisfaction.
2.I am here and ready to assist you with any questions or concerns you might have before or after the purchase.
3.My goal is to make sure you are a happy customer and pleasant shopping with us.

If you are satisfied with the purchase and our total service, your comment is very important in our business success. Please take a minute to leave us a positive feedback with an overall Detailed Selling Rating (DSR) of 5.
Our eBay account setup auto feedback, so eBay system gives you automatically Positive feedback back after your positive feedback left.
If you plan to give us a neutral/negative feedback Or open ebay/paypal case, please write to us immediately so that we can do our best to resolve your problem.