2x Window Tint Film Tinting Silver Chrome Reflective 76cm x 3M


IMPORTANT: 

the film must be separated from its transparent protective layer this is best done with 2 small pieces of scotch/adhesive tape/sticked on both sides of one of the corners of the film. This will reveal its adhesive side. Please apply it on your window with plenty of soapy water on the glass, then press with the plastic tool (to avoid scratching the film, please do not press too hard with the plastic tool or better wrap it in some cloth).



Specifications and features:



Fitting Instructions:

  1. Clean the windows inside and out with soapy water. NO AMMONIA
  2. Cut film pattern on the outside of the glass. Linear should face outside.
  3. Trim film to fit on outside of window
  4. Spray a light film of water on the glass and film.
  5. Peel film apart from backing on the inside of the window. Use two pieces of transparent tape to separate the film from the liner.
  6. Spray adhesive with a soapy water solution.
  7. Apply window film to the inside of the window.
  8. Spray the film with a soapy water solution and squeegee firmly.
  9. Trim film with a new sharp fixing tool, leaving a 1/16" gap around the edges.
  10. Spray the film with a soapy water solution and squeegee firmly.
  11. Drying time 3 days in full sun.


Package includes: