XENDOLL W103MA Mini Wood Metal Turning Lathe Machine w/ 3 Jaw Chuck 240v - NEW, Damaged Box
***NEW, slightly damaged box.***
FEATURES & DETAILS
**Soft metals only, such as pure copper and pure aluminum), NO ALLOYS***
SPECIFICATIONS
Input voltage: AC100V~240V 50/60HZ ;Output voltage : DC12V 3A/4A ;Motor rated power: 24W
Motor speed: High speed motor 18000r/min±15%
Low speed motor: 10000r/min±15%
Spindle speed: high speed motor 3000r/min±15%
Low speed motor: 1600r/min±15%
Spindle jump: <0.1mm
Large slider stroke(Z axis): 45mm
Small slider stroke(X axis): 35mm
Center height: 25mm
Center distance: 110mm
Turning tool size: 3.5*3.5mm
Maximum processing diameter: 13mm positive claw, 45mm reverse claw
Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw
Handle scale: 0.1mm/division
SIZE: 10.94 x 3.94 x 5.91 INCH
WHAT’S INCLUDED
1 x Lathe
Set of Accessories:
2x inner hexagon spanner 2pcs(S=2\3)
1x double-headed wrench (S=14\17)
1x cross screwdriver;1xcenter finder
1x turning tool (3.5*3.5mm), on machine
5x Height increase film(0.3mm);5x Height increase film(0.4mm)
2x three-jaw chuck locking rod
2x two hole clamping plate
2xscrew(M4*16)
1 x apron
1 x goggles
RECEIVED FEEDBACK & OUR REPLY
1. Precision problem:
This machine is a micro lathe and cannot achieve very high precision. Please check the size of the accessories. If you have requirements for high precision, please consider purchasing carefully.
2. Chuck swing problem:
It is because of the vibration of the motor. Because it is a micro lathe, it is small and light, so it will vibrate slightly, but this is within the normal range.
3. Tool version off-center:
Maybe the tip of the knife is not centered. This can be solved by raising the height of the turning tool, that is, adding a spacer under the blade.
QUESTIONS & ANSWERS
1.Q: Can I change the speed of the machine?
A: The speed is fixed. Can not change the speed of the machine. Note: The machine defaults to use the high-speed motor.
2.Q: What can I process?
A: You can process wood, plastic and soft metals (pure copper and pure aluminum).Note: The harder the material, the smaller the depth of cut.
3.Q: What is the size of turning tool?
A: The size of the turning tool is φ3.5*3.5mm, material is high speed steel. At the same time, we offer several Height increase films for you to adjust the height of the turning tool.
4.Q: Is the machine manual or automatic; What is the max swing over bed?
A: It’s a manual machine; the Max swing over bed is 50mm.